Data sheet ©2025, ATESTEO GmbH & Co. KG, This product data sheet was created on 03.07.2025. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for consequential losses arising from the use of this product data sheet or the information contained therein.

Technical data Type - PTO Torque measuring system Rated torque short measurement range (optional, minimum) (Mdns) #2 Accuracy class extended (for Mdn) Test signal Frequency (RS422), Voltage, CAN bus see test report Mechanical dimensions Outer diameter of rotor #4 Lengths (Rotor, without centering) Pitch circle diameter #5 Speeds and speed measuring systems Speed detection (integrated) - inductive Speed detection (optional) - without Maximum Speed without speed detection system rpm 2,000 Optional increased speed rpm N/A Maximum speed with magnetic speed encoder rpm N/A Maximum speed with optical...

PTOTechnical data Type - PTO Linearity deviation including hysteresis related to Mdn Frequency, 0%...30% Frequency, 30%...60% Frequency, 60%...100% CAN, 0%...30% CAN, 60%...100% Voltage output Current output Rel. standard deviation of the reproducibility according to DIN 1319, by reference to variation of the output signal (rel. to Mdn) Frequency output CAN output Voltage output Current output Temperature influence per 10K in the nominal temperature range on the output signal related to the actual value of signal span (rel. to Mdn) Frequency output CAN output Voltage output Current output Temperature...

Technical data Type Accuracy class Rated torque (Mdn) Nominal sensitivity (range between zero torque and rated torque) Output signal at zero torque Nominal output signal Frequency output at positive nominal value kHz Frequency output at negative nominal value kHz Voltage output at positive nominal value V Voltage output at negative nominal value V Current output at positive nominal value mA Current output at negative nominal value mA ©2025, ATESTEO GmbH & Co. KG, This product data sheet was created on 03.07.2025. The information contained in the product data sheet corresponds to the status quo...

PTOTechnical data Type - PTO Speed measuring system Inductive (track at rotor) Maximum speeds (related to PPR) rpm 2,000 Minimum speed for sufficient pulse stability rpm >-5.0 Speed measuring system Magneto resistive (2 tracks approx. 90 degree phase shifted) Maximum speeds (related to PPR) rpm N/A Minimum speed for sufficient pulse stability rpm N/A Nominal clearance (sensor - pole ring) mm N/A Working airgap (sensor - pole ring) mm N/A Nominal axial displacement (rotor - stator) #7 mm N/A Tolerance to nominal axial displacement (rotor - stator) mm N/A Speed measuring system Optical Maximum...

Technical data Type Accuracy class Rated torque (Mdn) Angular measuring system ©2025, ATESTEO GmbH & Co. KG, This product data sheet was created on 03.07.2025. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for consequential losses arising from the use of this product data sheet or the information contained therein. 6

PTOTechnical data Type - PTO Temperature ranges Nominal temperature range (Rotor) °C 0...80 Operating temperature range (Rotor) #8 °C -10...80 Storage temperature range (Rotor) °C -20...80 Nominal temperature range (Stator) °C N/A Operating temperature range (Stator) #9 °C N/A Storage temperature range (Stator) °C N/A Nominal temperature range (TCU) °C 0...70 Operating temperature range (TCU) #10 °C -10...70 Storage temperature range (TCU) °C -10...70 Limit torque, related to Mdn % 210 190 Breaking torque approx., related to Mdn % 420 380 Axial limit force kN 45.00 55.50 Lateral limit force N...

Technical data Type Accuracy class Rated torque (Mdn) Mechanical values Torsional stiffness kNm/rad Axial stiffness kN/mm Radial stiffness kN/mm Bending stiffness kNm/° Deflection at axial limit force mm Additional radial deviation at lateral limit force mm Parallel deviation at bending limit torque mm ©2025, ATESTEO GmbH & Co. KG, This product data sheet was created on 03.07.2025. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the...

Technical data Type - PTO Weight approx. Stator (without speed encoder) #13 kg Mounting distances (without optional speed detection system) Nominal radial displacement (rotor - stator) mm Tolerance to nominal radial displacement (rotor - stator) mm Nominal axial displacement (rotor - stator) #7 mm Tolerance to nominal axial displacement (rotor - stator) mm Flatness and concentricity tolerances rotor Circular run-out-axial tolerance #14 mm Circular run-out-radial tolerance #14 mm Power supply Max. current consumption in measuring mode A Max. current consumption in start-up mode A Nominal power...

Technical data Type Accuracy class Rated torque (Mdn) Protection class (Rotor) Protection class (Stator) Protection class (rotor, extended) Protection class (stator, extended) Pitch circle screw information CAN bus type Configuration interface Central hole Material Measuring range (related to Mdn) Compatible evaluation units (TCU) Stator type Sales information Article number - Unit with bearing ©2025, ATESTEO GmbH & Co. KG, This product data sheet was created on 03.07.2025. The information contained in the product data sheet corresponds to the status quo at the time the document was created....

#2 Second torque range #5 Pitch circle diameter #8 Temperature range (rotor) #9 Temperature range (stator) Based on customer requests, the measurement systems can optionally be optimized for not listed nominal torque values (intermediate ranges possible). The written second nominal torque value (Mdns) is the smallest possible. Greater second torque ranges can be chosen on demand. Mechanical values and load limits vary between single and dual range torque meters. A data sheet for dual range torque meters with specific values can be requested. Mechanical dimensions are without engagement. Use the...