Data sheet ©2026, ATESTEO GmbH & Co. KG, This product data sheet was created on 07.30.2026. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for consequential losses arising from the use of this product data sheet or the information contained therein.

Technical data Accuracy class Rated torque (Mdn) <±0.1080,000 100,000 120,000 Torque measuring system Mechanical dimensions Outer diameter of rotor #3 Lengths (Rotor, without centering) Pitch circle diameter #4 Non-linearity incl. Hysteresis, stationary Rel. Standard deviation of the reproducibility Temperature influence per 10K in the nominal temperature range Nominal output signal Nominal value Measuring system Bridge resistance nominal Group delay times (of all compatible TCUs) Frequency output Voltage output CAN bus ©2026, ATESTEO GmbH & Co. KG, This product data sheet was created on 07.30.2026....

Technical data Type - F4 RTS Temperature ranges Nominal temperature range (Rotor) °C 10...70 Operating temperature range (Rotor) #5 °C -20...85 Storage temperature range (Rotor) °C -10...80 Load limits Limit torque, related to Mdn Breaking torque approx., related to Mdn Axial limit force Lateral limit force Bending limit torque Mechanical values Weight approx. ©2026, ATESTEO GmbH & Co. KG, This product data sheet was created on 07.30.2026. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops...

Technical data Type Accuracy class Rated torque (Mdn) Pitch circle screw information - 16 * M30 (12.9) Measuring range (related to Mdn) % 120 Protection class (Rotor) - IP50 Protection class (rotor, extended) - N/A Compatible evaluation units (TCU) - SAFO2.3D / SAFO2.3 Sales information ©2026, ATESTEO GmbH & Co. KG, This product data sheet was created on 07.30.2026. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data....

Remarks and information Link no. Topic #4 Pitch circle diameter #5 Temperature range (rotor) Based on customer requests, the measurement systems can optionally be optimized for not listed nominal torque values (intermediate ranges possible). Mechanical dimensions are without engagement. Use the drawings and step files as master for your constructions. Value can vary by optional components. Please find details to this attribute in the integrated drawings. The pitch circle diameter is identically at input and output side for most systems. More information is given in the drawings of a product....

©2026, ATESTEO GmbH & Co. KG, This product data sheet was created on 07.30.2026. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for 6 consequential losses arising from the use of this product data sheet or the information contained therein.

Would you like to learn more about our products, solutions, and services in the area of measuring systems, vehicle equipment, and actuators? Just call us at +49 (0) 2404 9870 570 or send email to [email protected]. Your personal ATESTEO contact would be pleased to assist you. ATESTEO GmbH & Co. KG Konrad-Zuse-Straße 3 52477 Alsdorf Germany ©2026, ATESTEO GmbH & Co. KG, This product data sheet was created on 07.30.2026. Phone Email The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its...