Data sheet FxiS / FxeS ©2023, ATESTEO GmbH & Co. KG, This product data sheet was created on 03.27.2023. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for consequential losses arising from the use of this product data sheet or the information contained therein.

Technical data - Accuracy class Rated torque (Mdn) Torque measuring system Rated torque short measurement range (optional, minimum) (Mdns) #2 Accuracy class (extended for Mdn) % <±0.03 Outputs - Frequency, Voltage, Current, CAN bus, Alert Test signal - see test report Mechanical dimensions Outer diameter of rotor #4 mm 150 Lengths (Rotor, without centering) mm 80 Pitch circle diameter #5 mm 130.0 Speeds and speed measuring systems Speed detection (integrated) - inductive Speed detection (optional) - magn. Maximum Speed without speed detection system rpm 20,000 Optional increased speed rpm 25,000...

Technical data - Accuracy class Rated torque (Mdn) Linearity deviation including hysteresis related to Mdn Frequency, 0%...30% Frequency, 30%...60% Frequency, 60%...100% CAN, 0%...30% CAN, 60%...100% Voltage output Current output Rel. standard deviation of the reproducibility according to DIN 1319, by reference to variation of the output signal (rel. to Mdn) Frequency output CAN output Voltage output Current output Temperature influence per 10K in the nominal temperature range on the output signal related to the actual value of signal span (rel. to Mdn) Frequency output CAN output Voltage output...

Technical data - Accuracy class Rated torque (Mdn) Nominal sensitivity (range between zero torque and rated torque) Output signal at zero torque Nominal output signal Frequency output at positive nominal value kHz Frequency output at negative nominal value kHz Voltage output at positive nominal value V Voltage output at negative nominal value V Current output at positive nominal value mA Current output at negative nominal value mA Group delay time (main TCU) ©2023, ATESTEO GmbH & Co. KG, This product data sheet was created on 03.27.2023. The information contained in the product data sheet corresponds...

Technical data - Accuracy class Rated torque (Mdn) Speed measuring system Inductive (track at rotor) Maximum speeds (related to PPR) rpm 20,000 Minimum speed for sufficient pulse stability rpm >5.0 Speed measuring system Magneto resistive (2 tracks approx. 90 degree phase shifted) Maximum speeds (related to PPR) rpm Minimum speed for sufficient pulse stability rpm Nominal clearance (sensor - pole ring) mm Working airgap (sensor - pole ring) mm Nominal axial displacement (rotor - stator) #8 mm Tolerance to nominal axial displacement (rotor - stator) mm Speed measuring system Optical Maximum speeds...

Technical data - Accuracy class Rated torque (Mdn) Angular measuring system ©2023, ATESTEO GmbH & Co. KG, This product data sheet was created on 03.27.2023. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for consequential losses arising from the use of this product data sheet or the information contained therein. 6

Technical data Type Accuracy class Rated torque (Mdn) Temperature ranges Nominal temperature range (Rotor) Operating temperature range (Rotor) #9 Storage temperature range (Rotor) Nominal temperature range (Stator) Operating temperature range (Stator) #10 Storage temperature range (Stator) Nominal temperature range (TCU) Operating temperature range (TCU) Storage temperature range (TCU) Load limits Limit torque, related to Mdn Breaking torque approx., related to Mdn Axial limit force Lateral limit force Bending limit torque ©2023, ATESTEO GmbH & Co. KG, This product data sheet was created on 03.27.2023....

Technical data - Accuracy class Rated torque (Mdn) Mechanical values Torsional stiffness Axial stiffness Radial stiffness Bending stiffness Deflection at axial limit force mm <0.04 Additional radial deviation at lateral limit force mm <0.02 Parallel deviation at bending limit torque Inherent frequency Max. limits for relative shaft vibration (peak to peak) #12 pm ©2023, ATESTEO GmbH & Co. KG, This product data sheet was created on 03.27.2023. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops...

Technical data Accuracy class Rated torque (Mdn) Weight approx. Stator (without speed encoder) #13 Mounting distances (without optional speed detection system) Nominal radial displacement (rotor - stator) Tolerance to nominal radial displacement (rotor - stator) Nominal axial displacement (rotor - stator) #8 Tolerance to nominal axial displacement (rotor - stator) Flatness and concentricity tolerances rotor Circular run-out-axial tolerance #14 Circular run-out-radial tolerance #14 Power supply Nominal supply Supply range #15 Max. current consumption in measuring mode Max. current consumption...

Technical data Type Accuracy class Rated torque (Mdn) Protection class (rotor) Protection class (stator) Protection class (rotor, extended) Protection class (stator, extended) Pitch circle screw information Configuration interface Central hole Material Measuring range (related to Mdn) Compatible evaluation units (TCU) Stator type Sales information Article number U.S. FCC certificate ©2023, ATESTEO GmbH & Co. KG, This product data sheet was created on 03.27.2023. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually...

Remarks and information Link no. Topic #2 Second torque range #5 Pitch circle diameter #6 Speed detection max speed #9 Temperature range (rotor) #10 Temperature range (stator) Based on customer requests, the measurement systems can optionally be optimized for not listed nominal torque values (intermediate ranges possible). The written second nominal torque value (Mdns) is the smallest possible. Greater second torque ranges can be chosen on demand. Mechanical values and load limits vary between single and dual range torque meters. A data sheet for dual range torque meters with specific values...