Data sheet ©2022, ATESTEO GmbH & Co. KG, This product data sheet was created on 11.10.2022. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for consequential losses arising from the use of this product data sheet or the information contained therein.

DSTTechnical data Type DST Torque measuring system Rated torque short measurement range (optional, minimum) (Mdns) #2 Accuracy class (extended for Mdn) Test signal Frequency, Voltage see test report Mechanical dimensions Outer diameter of rotor #4 Lengths (Rotor, without centering) Pitch circle diameter #5 Speeds and speed measuring systems Speed detection (integrated) Speed detection (optional) Maximum Speed without speed detection system Optional increased speed Maximum speed with magnetic speed encoder Maximum speed with optical speed encoder Maximum speed with inductive speed encoder Torque...

DSTTechnical data Type DST Linearity deviation including hysteresis related to Mdn Frequency, 0%...30% Frequency, 30%...60% Frequency, 60%...100% CAN, 0%...30% CAN, 60%...100% Voltage output Current output Rel. standard deviation of the reproducibility according to DIN 1319, by reference to variation of the output signal (rel. to Mdn) Frequency output CAN output Voltage output Current output Temperature influence per 10K in the nominal temperature range on the output signal related to the actual value of signal span (rel. to Mdn) Frequency output CAN output Voltage output Current output Temperature...

Technical data Type Accuracy class Rated torque (Mdn) Nominal sensitivity (range between zero torque and rated torque) Output signal at zero torque Nominal output signal Frequency output at positive nominal value kHz Frequency output at negative nominal value kHz Voltage output at positive nominal value V Voltage output at negative nominal value V Current output at positive nominal value mA Current output at negative nominal value mA Group delay time ©2022, ATESTEO GmbH & Co. KG, This product data sheet was created on 11.10.2022. The information contained in the product data sheet corresponds...

Technical data Type Speed measuring system Inductive (track at rotor) Maximum speeds (related to PPR) rpm N/A Minimum speed for sufficient pulse stability rpm N/A Speed measuring system Magneto resistive (2 tracks approx. 90 degree phase shifted) Maximum speeds (related to PPR) rpm N/A Minimum speed for sufficient pulse stability rpm N/A Nominal clearance (sensor - pole ring) mm N/A Working airgap (sensor - pole ring) mm N/A Nominal axial displacement (rotor - stator) #7 mm N/A Tolerance to nominal axial displacement (rotor - stator) mm N/A Speed measuring system Optical Maximum speeds (related...

DSTTechnical data Type DST Temperature ranges Nominal temperature range (Rotor) °C N/A Operating temperature range (Rotor)#8 °C N/A Storage temperature range (Rotor) °C N/A Nominal temperature range (Stator) °C 0...70 Operating temperature range (Stator) #9 °C -10...70 Storage temperature range (Stator) °C -20...85 Nominal temperature range (TCU) °C N/A Operating temperature range (TCU) °C N/A Storage temperature range (TCU) °C N/A Limit torque, related to Mdn % 500 250 250 Breaking torque approx., related to Mdn % 1,000 500 500 Axial limit force kN 5.40 5.40 8.00 Lateral limit force N 81.00...

DSTTechnical data Type DST Mechanical values Torsional stiffness kNm/rad Axial stiffness kN/mm Radial stiffness kN/mm Bending stiffness kNm/° Deflection at axial limit force mm Additional radial deviation at lateral limit force mm Parallel deviation at bending limit torque mm Max. limits for relative shaft vibration (peak to peak) #11 pm ©2022, ATESTEO GmbH & Co. KG, This product data sheet was created on 11.10.2022. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves...

DSTTechnical data Type DST Weight approx. Stator (without speed encoder) #12 kg N/A Mounting distances (without optional speed detection system) Nominal radial displacement (rotor - stator) mm N/A Tolerance to nominal radial displacement (rotor - stator) mm N/A Nominal axial displacement (rotor - stator) #7 mm N/A Tolerance to nominal axial displacement (rotor - stator) mm N/A Flatness and concentricity tolerances rotor Circular run-out-axial tolerance #13 mm N/A Circular run-out-radial tolerance #13 mm N/A Power supply Max. current consumption in measuring mode A <0.5 Max. current consumption...

Technical data Type Accuracy class Rated torque (Mdn) Protection class (rotor) Protection class (stator) Protection class (rotor, extended) Protection class (stator, extended) Pitch circle screw information CAN Configuration interface Central hole Material Measuring range (related to Mdn) Matching evaluation units Stator type Sales information Article number U.S. FCC certificate - Unit with bearing ©2022, ATESTEO GmbH & Co. KG, This product data sheet was created on 11.10.2022. The information contained in the product data sheet corresponds to the status quo at the time the document was created....

#2 Second torque range #5 Pitch circle diameter #8 Temperature range (rotor) #9 Temperature range (stator) Based on customer requests, the measurement systems can optionally be optimized for not listed nominal torque values (intermediate ranges possible). The written second nominal torque value (Mdns) is the smallest possible. Greater second torque ranges can be chosen on demand. Mechanical values and load limits vary between single and dual range torque meters. A data sheet for dual range torque meters with specific values can be requested. Mechanical dimensions are without engagement. Use the...

Vibration limits are not an influence to the machine. They reflect the allowed effect onto the rotor (ISO 7919-3). Parameter "n" is given in "r/min.". Weights are related to components without options like speed detection system. Please contact us for exact weight information of options. The parameters of "Flatness and concentricity tolerances rotor" are manufacturing tolerances. The supply voltage range must be given at measurement system side. Long wires can reduce the voltage level from power supply to measurement system. ©2022, ATESTEO GmbH & Co. KG, This product data sheet was created on...