Data sheet ©2026, ATESTEO GmbH & Co. KG, This product data sheet was created on 01.23.2026. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for consequential losses arising from the use of this product data sheet or the information contained therein.

DF5 ibex Technical data Type - DF5 ibex Torque measuring system Rated torque short measurement range (optional, minimum) (Mdns) #2 Accuracy class extended (for Mdn) Test signal Frequency (RS422), Voltage, CAN bus, Alert see test report Mechanical dimensions Outer diameter of rotor #4 Lengths (Rotor, without centering) Pitch circle diameter #5 Speeds and speed measuring systems Speed detection (integrated) - without Speed detection (optional) - magn. Maximum Speed without speed detection system rpm 12,000 Optional increased speed rpm 14,000 Maximum speed with magnetic speed encoder rpm 6,500 Maximum...

DF5 ibex Technical data Type - DF5 ibex Linearity deviation including hysteresis related to Mdn Frequency, 0%...30% Frequency, 30%...60% Frequency, 60%...100% CAN, 0%...30% CAN, 60%...100% Voltage output Current output Rel. standard deviation of the reproducibility according to DIN 1319, by reference to variation of the output signal (rel. to Mdn) Frequency output CAN output Voltage output Current output Temperature influence per 10K in the nominal temperature range on the output signal related to the actual value of signal span (rel. to Mdn) Frequency output CAN output Voltage output Current...

DF5 ibex Technical data Type Accuracy class Rated torque (Mdn) 10,000 Nominal sensitivity (range between zero torque and rated torque) Output signal at zero torque Nominal output signal Frequency output at positive nominal value kHz Frequency output at negative nominal value kHz Voltage output at positive nominal value V Voltage output at negative nominal value V Current output at positive nominal value mA Current output at negative nominal value mA Group delay time (main TCU) ©2026, ATESTEO GmbH & Co. KG, This product data sheet was created on 01.23.2026. The information contained in the product...

DF5 ibex Technical data Type - DF5 ibex Speed measuring system Inductive (track at rotor) Maximum speeds (related to PPR) rpm N/A Minimum speed for sufficient pulse stability rpm N/A Speed measuring system Magneto resistive (2 tracks approx. 90 degree phase shifted) Maximum speeds (related to PPR) rpm 6,500 Minimum speed for sufficient pulse stability rpm >0.1 Nominal clearance (sensor - pole ring) mm 0.7 Working airgap (sensor -pole ring) mm 0.1...1.0 Nominal axial displacement (rotor - stator) #7 mm 7.0 Tolerance to nominal axial displacement (rotor - stator) mm ±0.5 Speed measuring system...

DF5 ibex Technical data Type Accuracy class Rated torque (Mdn) 10,000 Angular measuring system Requirement - Optional magnetic speed detection Output signals - CAN bus, Voltage ©2026, ATESTEO GmbH & Co. KG, This product data sheet was created on 01.23.2026. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for consequential losses arising from the use of this product data sheet...

DF5 ibex Technical data Type - DF5 ibex Temperature ranges Nominal temperature range (Rotor) °C 0...80 Operating temperature range (Rotor) #8 °C -20...85 Storage temperature range (Rotor) °C -30...85 Nominal temperature range (Stator) °C 0...80 Operating temperature range (Stator) #9 °C -20...85 Storage temperature range (Stator) °C -30...85 Nominal temperature range (TCU) °C 0...70 Operating temperature range (TCU) °C -20...70 Storage temperature range (TCU) °C -30...85 Limit torque, related to Mdn % 350 Breaking torque approx., related to Mdn % 625 500 Axial limit force kN 12.40 17.90 Lateral...

DF5 ibex Technical data Type - DF5 ibex Mechanical values Torsional stiffness kNm/rad Axial stiffness kN/mm Radial stiffness kN/mm Bending stiffness kNm/° Deflection at axial limit force mm Additional radial deviation at lateral limit force mm Parallel deviation at bending limit torque mm Max. limits for relative shaft vibration (peak to peak) #11 |jm ©2026, ATESTEO GmbH & Co. KG, This product data sheet was created on 01.23.2026. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products...

DF5 ibex Technical data Type - DF5 ibex Weight approx. Stator (without speed encoder) #12 kg Mounting distances (without optional speed detection system) Nominal radial displacement (rotor - stator) mm Tolerance to nominal radial displacement (rotor - stator) mm Nominal axial displacement (rotor - stator) #7 mm Tolerance to nominal axial displacement (rotor - stator) mm Flatness and concentricity tolerances rotor Circular run-out-axial tolerance #13 mm Circular run-out-radial tolerance #13 mm Power supply Max. current consumption in measuring mode A Max. current consumption in start-up mode A...

DF5 ibex Technical data Type Accuracy class Rated torque (Mdn) Protection class (Rotor) Protection class (Stator) Protection class (rotor, extended) Protection class (stator, extended) Pitch circle screw information CAN bus type Configuration interface Central hole Material Measuring range (related to Mdn) Compatible evaluation units (TCU) Stator type Sales information Article number U.S. FCC certificate ©2026, ATESTEO GmbH & Co. KG, This product data sheet was created on 01.23.2026. The information contained in the product data sheet corresponds to the status quo at the time the document was...