Data sheet ©2026, ATESTEO GmbH & Co. KG, This product data sheet was created on 01.12.2026. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for consequential losses arising from the use of this product data sheet or the information contained therein.

DF3 ibex Technical data Type - DF3 ibex Torque measuring system Rated torque short measurement range (optional, minimum) (Mdns) #2 Accuracy class extended (for Mdn) Test signal Frequency (RS422), Voltage, CAN bus, Alert see test report Mechanical dimensions Outer diameter of rotor #4 Lengths (Rotor, without centering) Pitch circle diameter #5 Speeds and speed measuring systems Speed detection (integrated) - without Speed detection (optional) - magn. Maximum Speed without speed detection system rpm 16,000 Optional increased speed rpm 18,000 Maximum speed with magnetic speed encoder rpm 9,000 Maximum...

DF3 ibex Technical data Type - DF3 ibex Linearity deviation including hysteresis related to Mdn Frequency, 0%...30% Frequency, 30%...60% Frequency, 60%...100% CAN, 0%...30% CAN, 60%...100% Voltage output Current output Rel. standard deviation of the reproducibility according to DIN 1319, by reference to variation of the output signal (rel. to Mdn) Frequency output CAN output Voltage output Current output Temperature influence per 10K in the nominal temperature range on the output signal related to the actual value of signal span (rel. to Mdn) Frequency output CAN output Voltage output Current...

DF3 ibex Technical data Type Accuracy class Rated torque (Mdn) Nominal sensitivity (range between zero torque and rated torque) Output signal at zero torque Nominal output signal Frequency output at positive nominal value kHz Frequency output at negative nominal value kHz Voltage output at positive nominal value V Voltage output at negative nominal value V Current output at positive nominal value mA Current output at negative nominal value mA Group delay time (main TCU) ©2026, ATESTEO GmbH & Co. KG, This product data sheet was created on 01.12.2026. The information contained in the product data...

Technical data Type Accuracy class Speed measuring system Inductive (track at rotor) Maximum speeds (related to PPR) Minimum speed for sufficient pulse stability Speed measuring system Magneto resistive (2 tracks approx. 90 degree phase shifted) Maximum speeds (related to PPR) Minimum speed for sufficient pulse stability Nominal clearance (sensor - pole ring) Working airgap (sensor - pole ring) Nominal axial displacement (rotor - stator) #7 Tolerance to nominal axial displacement (rotor - stator) Maximum speeds (related to PPR) Minimum speed for sufficient pulse stability Nominal radial displacement...

DF3 ibex Technical data Type Accuracy class Rated torque (Mdn) Angular measuring system Requirement - Optional magnetic speed detection Output signals - CAN bus, Voltage ©2026, ATESTEO GmbH & Co. KG, This product data sheet was created on 01.12.2026. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for consequential losses arising from the use of this product data sheet or the...

DF3 ibex Technical data Type - DF3 ibex Temperature ranges Nominal temperature range (Rotor) °C 0...80 Operating temperature range (Rotor) #8 °C -20...85 Storage temperature range (Rotor) °C -30...85 Nominal temperature range (Stator) °C 0...80 Operating temperature range (Stator) #9 °C -20...85 Storage temperature range (Stator) °C -30...85 Nominal temperature range (TCU) °C 0...70 Operating temperature range (TCU) °C -20...70 Storage temperature range (TCU) °C -30...85 Breaking torque approx., related to Mdn % 710 585 520 Axial limit force kN 9.20 13.20 17.00 Lateral limit force N 2,800.00...

DF3 ibex Technical data Type - DF3 ibex Mechanical values Torsional stiffness Axial stiffness Radial stiffness Bending stiffness Deflection at axial limit force Additional radial deviation at lateral limit force Parallel deviation at bending limit torque Inherent frequency Max. limits for relative shaft vibration (peak to peak) #11 ©2026, ATESTEO GmbH & Co. KG, This product data sheet was created on 01.12.2026. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the...

Technical data Type Accuracy class Stator (without speed encoder) #12 Nominal radial displacement (rotor - stator) Tolerance to nominal radial displacement (rotor - stator) Nominal axial displacement (rotor - stator) #7 Tolerance to nominal axial displacement (rotor - stator) Circular run-out-axial tolerance #13 Circular run-out-radial tolerance #13 Nominal supply Max. current consumption in measuring mode Max. current consumption in start-up mode Nominal power consumption Frequency output Voltage output Current output CAN output conversation rate Weight approx. Mounting distances (without optional...

DF3 ibex Technical data Type Accuracy class Rated torque (Mdn) Protection class (Rotor) Protection class (Stator) Protection class (rotor, extended) Protection class (stator, extended) Pitch circle screw information CAN bus type Configuration interface Central hole Material Measuring range (related to Mdn) Compatible evaluation units (TCU) Stator type Sales information Article number U.S. FCC certificate ©2026, ATESTEO GmbH & Co. KG, This product data sheet was created on 01.12.2026. The information contained in the product data sheet corresponds to the status quo at the time the document was...

DF3 ibex Remarks and information Link no. Topic #2 Second torque range #5 Pitch circle diameter #8 Temperature range (rotor) #9 Temperature range (stator) Based on customer requests, the measurement systems can optionally be optimized for not listed nominal torque values (intermediate ranges possible). The written second nominal torque value (Mdns) is the smallest possible. Greater second torque ranges can be chosen on demand. Mechanical values and load limits vary between single and dual range torque meters. A data sheet for dual range torque meters with specific values can be requested. Mechanical...