*mydirectindustry

Data sheet DF RTS

Product catalog summary

Overview: This document is a product data sheet for the DF RTS series by ATESTEO GmbH & Co. KG, detailing technical specifications and operational guidelines for various models (DF1 RTS to DF5 RTS). The document was created on July 5, 2024, and reflects the status at that time. ATESTEO reserves the right to update the technical data as products are further developed.

Specifications:

Accuracy Class: ≤±0.03%
Rated Torque (Mdn): Ranges from 200 Nm to 10,000 Nm depending on the model.
Temperature Ranges: Nominal (0 to 80°C), Operating (-20 to 85°C), Storage (-30 to 85°C).
Mechanical Dimensions: Vary by model, with outer rotor diameters ranging from 107 mm to 230 mm.
Load Limits: Limit torque up to 300% of Mdn, breaking torque up to 600% of Mdn.

Technical Data:

Measuring System: Stationary technology with non-amplified outputs.
Nominal Output Signal: 0.80 to 1.00 mV/V.
Excitation Voltage: Less than 20 V DC/AC.
Bridge Resistance: 1,480 Ohm.

Mechanical Values:

Torsional Stiffness: Ranges from 156 kNm/rad to 8,296 kNm/rad.
Inertia of Rotor: Varies from 0.0017 kgm² to 0.0492 kgm².
Weight: Rotor weights range from 1.2 kg to 7.8 kg.

Additional Information:

Optional optimizations for nominal torque values are available upon request.
Mechanical dimensions exclude engagement; refer to drawings for construction details.
Load limits are valid only if no other loads are applied simultaneously.

Contact Information: For further inquiries, contact ATESTEO at +49 (0) 2404 9870 570 or email [email protected].

Catalog excerpts

Data sheet ©2024, ATESTEO GmbH & Co. KG, This product data sheet was created on 05.07.2024. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for consequential losses arising from the use of this product data sheet or the information contained therein.

Open the catalog to page 1

Technical data Type Accuracy class Torque measuring system Lengths (Rotor, without centering) mm 45 48 49 50 60 Mechanical dimensions Non-linearity incl. Hysteresis, stationary % <±0.03 Rel. Standard deviation of the reproducibility Temperature influence per 10K in the nominal temperature range Nominal output signal Measuring system Excitation voltage DC/AC V <20.0 Bridge resistance nominal Ohm 1,480 Group delay times (of all compatible TCUs) ©2024, ATESTEO GmbH & Co. KG, This product data sheet was created on 05.07.2024. The information contained in the product data sheet corresponds to the...

Open the catalog to page 2

Technical data Type Accuracy class Temperature ranges Nominal temperature range (Rotor) Operating temperature range (Rotor) #5 Storage temperature range (Rotor) Limit torque, related to Mdn Breaking torque approx., related to Mdn Axial limit force Lateral limit force Bending limit torque Mechanical values Torsional stiffness Weight approx. ©2024, ATESTEO GmbH & Co. KG, This product data sheet was created on 05.07.2024. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves...

Open the catalog to page 3

Technical data Type Accuracy class Pitch circle screw information Measuring range (related to Mdn) Compatible evaluation units (TCU) - SAFO2.3D / SAFO2.3 Sales information Article number ©2024, ATESTEO GmbH & Co. KG, This product data sheet was created on 05.07.2024. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for consequential losses arising from the use of this product...

Open the catalog to page 4

#4 Pitch circle diameter #5 Temperature range (rotor) Based on customer requests, the measurement systems can optionally be optimized for not listed nominal torque values (intermediate ranges possible). Mechanical dimensions are without engagement. Use the drawings and step files as master for your constructions. Value can vary by optional components. Please find details to this attribute in the integrated drawings. The pitch circle diameter is identically at input and output side for most systems. More information is given in the drawings of a product. The given values are only valid if no other...

Open the catalog to page 5

©2024, ATESTEO GmbH & Co. KG, This product data sheet was created on 05.07.2024. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for 6 consequential losses arising from the use of this product data sheet or the information contained therein.

Open the catalog to page 6

©2024, ATESTEO GmbH & Co. KG, This product data sheet was created on 05.07.2024. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for 7 consequential losses arising from the use of this product data sheet or the information contained therein.

Open the catalog to page 7

©2024, ATESTEO GmbH & Co. KG, This product data sheet was created on 05.07.2024. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for 8 consequential losses arising from the use of this product data sheet or the information contained therein.

Open the catalog to page 8

©2024, ATESTEO GmbH & Co. KG, This product data sheet was created on 05.07.2024. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for 9 consequential losses arising from the use of this product data sheet or the information contained therein.

Open the catalog to page 9

©2024, ATESTEO GmbH & Co. KG, This product data sheet was created on 05.07.2024. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for 10 consequential losses arising from the use of this product data sheet or the information contained therein.

Open the catalog to page 10

Would you like to learn more about our products, solutions, and services in the area of measuring systems, vehicle equipment, and actuators? Just call us at +49 (0) 2404 9870 570 or send email to [email protected]. Your personal ATESTEO contact would be pleased to assist you. ATESTEO GmbH & Co. KG Konrad-Zuse-Straße 3 52477 Alsdorf Germany ©2024, ATESTEO GmbH & Co. KG, This product data sheet was created on 05.07.2024. Phone Email The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its...

Open the catalog to page 11

All ATESTEO GmbH & Co. KG catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list