Data sheet ©2024, ATESTEO GmbH & Co. KG, This product data sheet was created on 11.22.2024. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for consequential losses arising from the use of this product data sheet or the information contained therein.

DF plusTechnical data Type Accuracy class Torque measuring system Frequency (RS422), Voltage, CAN bus, Alert see test report Rated torque short measurement range (optional, Accuracy class extended (for Mdn) % Test signal - Mechanical dimensions Lengths (Rotor, without centering) mm 45 48 49 50 60 Speeds and speed measuring systems Speed detection (integrated) - Speed detection (optional) - Maximum Speed without speed detection system rpm Optional increased speed rpm Maximum speed with magnetic speed encoder rpm Maximum speed with optical speed encoder rpm Maximum speed with inductive speed encoder...

DF plusTechnical data Type Accuracy class Linearity deviation including hysteresis related to Mdn Frequency, 0%...30% Frequency, 30%...60% Frequency, 60%...100% CAN, 0%...30% CAN, 60%...100% Voltage output Current output Rel. standard deviation of the reproducibility according to DIN 1319, by reference to variation of the output signal (rel. to Mdn) Frequency output CAN output Voltage output Current output Temperature influence per 10K in the nominal temperature range on the output signal related to the actual value of signal span (rel. to Mdn) Frequency output CAN output Voltage output Current...

DF plusTechnical data Type Accuracy class Nominal sensitivity (range between zero torque and rated torque) Output signal at zero torque Nominal output signal Frequency output at positive nominal value kHz Frequency output at negative nominal value kHz Voltage output at positive nominal value V Voltage output at negative nominal value V Current output at positive nominal value mA Current output at negative nominal value mA Group delay time (main TCU) ©2024, ATESTEO GmbH & Co. KG, This product data sheet was created on 11.22.2024. The information contained in the product data sheet corresponds...

DF plus Technical data Type Accuracy class Speed measuring system Inductive (track at rotor) Maximum speeds (related to PPR) Minimum speed for sufficient pulse stability Speed measuring system Magneto resistive (2 tracks approx. 90 degree phase shifted) Maximum speeds (related to PPR) Minimum speed for sufficient pulse stability Nominal clearance (sensor - pole ring) Working airgap (sensor - pole ring) Nominal axial displacement (rotor - stator) #7 Tolerance to nominal axial displacement (rotor - stator) Speed measuring system Maximum speeds (related to PPR) Minimum speed for sufficient pulse...

DF plusTechnical data Type Accuracy class Angular measuring system Output signals - CAN bus, Voltage ©2024, ATESTEO GmbH & Co. KG, This product data sheet was created on 11.22.2024. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for consequential losses arising from the use of this product data sheet or the information contained therein. 6

DF plusTechnical data Type Accuracy class Temperature ranges Nominal temperature range (Rotor) °C 0...80 Operating temperature range (Rotor)#8 °C -20...85 Storage temperature range (Rotor) °C -30...85 Nominal temperature range (Stator) °C 0...80 Operating temperature range (Stator) #9 °C -20...85 Storage temperature range (Stator) °C -30...85 Nominal temperature range (TCU) °C 0...70 Operating temperature range (TCU) °C -20...70 Storage temperature range (TCU) °C -30...85 Load limits Limit torque, related to Mdn Breaking torque approx., related to Mdn Axial limit force Lateral limit force Bending...

DF plus Technical data Type Accuracy class Mechanical values Torsional stiffness Axial stiffness Radial stiffness Bending stiffness Deflection at axial limit force Additional radial deviation at lateral limit force mm Parallel deviation at bending limit torque mm <0.08 <0.10 <0.10 <0.12 <0.14 Max. limits for relative shaft vibration (peak to peak) #11 pm ©2024, ATESTEO GmbH & Co. KG, This product data sheet was created on 11.22.2024. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its...

Technical data Accuracy class Rated torque (Mdn) Weight approx. Stator (without speed encoder) #12 Mounting distances (without optional speed detection system) Nominal radial displacement (rotor - stator) Tolerance to nominal radial displacement (rotor - stator) Nominal axial displacement (rotor - stator) #7 Tolerance to nominal axial displacement (rotor - stator) Flatness and concentricity tolerances rotor Circular run-out-axial tolerance #13 Circular run-out-radial tolerance #13 Power supply Nominal supply Supply range #14 Max. current consumption in measuring mode Max. current consumption...

DF plusTechnical data Type Accuracy class Protection class (Rotor) - IP54 Protection class (Stator) - IP54 Protection class (rotor, extended) - N/A Protection class (stator, extended) - N/A Pitch circle screw information Configuration interface - Ethernet Measuring range (related to Mdn) Compatible evaluation units (TCU) Stator type - Steel Steel Steel Steel Steel Sales information Article number ©2024, ATESTEO GmbH & Co. KG, This product data sheet was created on 11.22.2024. The information contained in the product data sheet corresponds to the status quo at the time the document was created....

#2 Second torque range #5 Pitch circle diameter #8 Temperature range (rotor) #9 Temperature range (stator) Based on customer requests, the measurement systems can optionally be optimized for not listed nominal torque values (intermediate ranges possible). The written second nominal torque value (Mdns) is the smallest possible. Greater second torque ranges can be chosen on demand. Mechanical values and load limits vary between single and dual range torque meters. A data sheet for dual range torque meters with specific values can be requested. Mechanical dimensions are without engagement. Use the...