Data sheet ©2026, ATESTEO GmbH & Co. KG, This product data sheet was created on 10.16.2026. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for consequential losses arising from the use of this product data sheet or the information contained therein.

DF plus HS Technical data Type Accuracy class Rated torque (Mdn) Torque measuring system Rated torque short measurement range (optional, minimum) (Mdns) #2 Accuracy class extended (for Mdn) Test signal Frequency (RS422), Voltage, CAN bus, Alert see test report Mechanical dimensions Outer diameter of rotor #4 mm Lengths (Rotor, without centering) mm Pitch circle diameter #5 mm Speeds and speed measuring systems Speed detection (integrated) - Speed detection (optional) - Maximum Speed without speed detection system rpm Optional increased speed #6 rpm Maximum speed with magnetic speed encoder rpm...

DF plus HSTechnical data Type - DF plus HS Linearity deviation including hysteresis related to Mdn Frequency, 0%...30% Frequency, 30%...60% Frequency, 60%...100% CAN, 0%...30% CAN, 60%...100% Voltage output Current output Rel. standard deviation of the reproducibility according to DIN 1319, by reference to variation of the output signal (rel. to Mdn) Frequency output CAN output Voltage output Current output Temperature influence per 10K in the nominal temperature range on the output signal related to the actual value of signal span (rel. to Mdn) Frequency output CAN output Voltage output Current...

DF plus HS Technical data Type Accuracy class Rated torque (Mdn) Nominal sensitivity (range between zero torque and rated torque) Output signal at zero torque Nominal output signal Frequency output at positive nominal value kHz Frequency output at negative nominal value kHz Voltage output at positive nominal value V Voltage output at negative nominal value V Current output at positive nominal value mA Current output at negative nominal value mA Group delay time (main TCU) ©2026, ATESTEO GmbH & Co. KG, This product data sheet was created on 10.16.2026. The information contained in the product...

DF plus HSTechnical data Type - DF plus HS Speed measuring system Inductive (track at rotor) Maximum speeds (related to PPR) rpm N/A Minimum speed for sufficient pulse stability rpm N/A Speed measuring system Magneto resistive (2 tracks approx. 90 degree phase shifted) Maximum speeds (related to PPR) rpm N/A Minimum speed for sufficient pulse stability rpm N/A Nominal clearance (sensor - pole ring) mm N/A Working airgap (sensor - pole ring) mm N/A Nominal axial displacement (rotor - stator) #8 mm N/A Tolerance to nominal axial displacement (rotor - stator) mm N/A Speed measuring system Optical...

DF plus HS Technical data Type Accuracy class Rated torque (Mdn) Angular measuring system ©2026, ATESTEO GmbH & Co. KG, This product data sheet was created on 10.16.2026. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for consequential losses arising from the use of this product data sheet or the information contained therein. 6

DF plus HSTechnical data Type - DF plus HS Temperature ranges Nominal temperature range (Rotor) °C 0...80 Operating temperature range (Rotor) #9 °C -20...85 Storage temperature range (Rotor) °C -30...85 Nominal temperature range (Stator) °C 0...80 Operating temperature range (Stator) #10 °C -20...85 Storage temperature range (Stator) °C -30...85 Nominal temperature range (TCU) °C 0...70 Operating temperature range (TCU) °C -20...70 Storage temperature range (TCU) °C -30...85 Limit torque, related to Mdn % 475 300 275 250 225 Breaking torque approx., related to Mdn % 950 600 550 500 450 ©2026,...

DF plus HSTechnical data Type - DF plus HS Mechanical values Torsional stiffness Axial stiffness Radial stiffness Bending stiffness Deflection at axial limit force Additional radial deviation at lateral limit force Parallel deviation at bending limit torque Inherent frequency Max. limits for relative shaft vibration (peak to peak) #12 ©2026, ATESTEO GmbH & Co. KG, This product data sheet was created on 10.16.2026. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves...

DF plus HS Technical data Type - DF plus HS Weight approx. Stator (without speed encoder) #13 kg Mounting distances (without optional speed detection system) Nominal radial displacement (rotor - stator) mm Tolerance to nominal radial displacement (rotor - stator) mm Nominal axial displacement (rotor - stator) #8 mm Tolerance to nominal axial displacement (rotor - stator) mm Flatness and concentricity tolerances rotor Circular run-out-axial tolerance #14 mm Circular run-out-radial tolerance #14 mm Power supply Max. current consumption in measuring mode A Max. current consumption in start-up mode...

DF plus HS Technical data Type Accuracy class Rated torque (Mdn) Protection class (Rotor) Protection class (Stator) Protection class (rotor, extended) Protection class (stator, extended) Pitch circle screw information Configuration interface - Ethernet Measuring range (related to Mdn) % 110 Compatible evaluation units (TCU) - TCU5 Stator type - DF plus Sales information ©2026, ATESTEO GmbH & Co. KG, This product data sheet was created on 10.16.2026. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further...

#2 Second torque range #5 Pitch circle diameter #9 Temperature range (rotor) #10 Temperature range (stator) Based on customer requests, the measurement systems can optionally be optimized for not listed nominal torque values (intermediate ranges possible). The written second nominal torque value (Mdns) is the smallest possible. Greater second torque ranges can be chosen on demand. Mechanical values and load limits vary between single and dual range torque meters. A data sheet for dual range torque meters with specific values can be requested. Mechanical dimensions are without engagement. Use...