Data sheet ©2023, ATESTEO GmbH & Co. KG, This product data sheet was created on 06.01.2023. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for consequential losses arising from the use of this product data sheet or the information contained therein.

DF plus HS Technical data Type Accuracy class Torque measuring system Technology Rated torque short measurement range (optional, minimum) (Mdns) #2 Accuracy class extended (for Mdn) Frequency, Voltage, CAN bus, Alert Test signal Outer diameter of rotor #4 Lengths (Rotor, without centering) Pitch circle diameter #5 Speed detection (integrated) Speed detection (optional) Maximum Speed without speed detection system Optional increased speed #6 Maximum speed with magnetic speed encoder Maximum speed with optical speed encoder Maximum speed with inductive speed encoder Frequency output Voltage output...

DF plus HSTechnical data Type - DF plus HS Linearity deviation including hysteresis related to Mdn Frequency, 0%...30% Frequency, 30%...60% Frequency, 60%...100% CAN, 0%...30% CAN, 60%...100% Voltage output Current output Rel. standard deviation of the reproducibility according to DIN 1319, by reference to variation of the output signal (rel. to Mdn) Frequency output CAN output Voltage output Current output Temperature influence per 10K in the nominal temperature range on the output signal related to the actual value of signal span (rel. to Mdn) Frequency output CAN output Voltage output Current...

DF plus HSTechnical data Type Accuracy class Rated torque (Mdn) Nominal sensitivity (range between zero torque and rated torque) Output signal at zero torque Nominal output signal Frequency output at positive nominal value kHz Frequency output at negative nominal value kHz Voltage output at positive nominal value V Voltage output at negative nominal value V Current output at positive nominal value mA Current output at negative nominal value mA Group delay time (main TCU) ©2023, ATESTEO GmbH & Co. KG, This product data sheet was created on 06.01.2023. The information contained in the product data...

DF plus HSTechnical data Type - DF plus HS Speed measuring system Inductive (track at rotor) Maximum speeds (related to PPR) rpm N/A Minimum speed for sufficient pulse stability rpm N/A Speed measuring system Magneto resistive (2 tracks approx. 90 degree phase shifted) Maximum speeds (related to PPR) rpm N/A Minimum speed for sufficient pulse stability rpm N/A Nominal clearance (sensor - pole ring) mm N/A Working airgap (sensor - pole ring) mm N/A Nominal axial displacement (rotor - stator) #8 mm N/A Tolerance to nominal axial displacement (rotor - stator) mm N/A Speed measuring system Optical...

DF plus HSTechnical data Type Accuracy class Rated torque (Mdn) Angular measuring system ©2023, ATESTEO GmbH & Co. KG, This product data sheet was created on 06.01.2023. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for consequential losses arising from the use of this product data sheet or the information contained therein. 6

DF plus HSTechnical data Type - DF plus HS Temperature ranges Nominal temperature range (Rotor) °C 0...80 Operating temperature range (Rotor) #9 °C -20...85 Storage temperature range (Rotor) °C -30...85 Nominal temperature range (Stator) °C 0...80 Operating temperature range (Stator) #10 °C -20...85 Storage temperature range (Stator) °C -30...85 Nominal temperature range (TCU) °C 0...70 Operating temperature range (TCU) °C -20...70 Storage temperature range (TCU) °C -30...85 Limit torque, related to Mdn % 475 300 275 250 225 Breaking torque approx., related to Mdn % 950 600 550 500 450 ©2023,...

DF plus HSTechnical data Type - DF plus HS Mechanical values Torsional stiffness Axial stiffness Radial stiffness Bending stiffness Deflection at axial limit force Additional radial deviation at lateral limit force Parallel deviation at bending limit torque Inherent frequency Max. limits for relative shaft vibration (peak to peak) #12 ©2023, ATESTEO GmbH & Co. KG, This product data sheet was created on 06.01.2023. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves...

Technical data Weight approx. Stator (without speed encoder) #13 Mounting distances (without optional speed detection system) Nominal radial displacement (rotor - stator) Tolerance to nominal radial displacement (rotor - stator) Nominal axial displacement (rotor - stator) #8 Tolerance to nominal axial displacement (rotor - stator) Flatness and concentricity tolerances rotor Circular run-out-axial tolerance #14 Circular run-out-radial tolerance #14 Power supply Nominal supply Supply range #15 Max. current consumption in measuring mode Max. current consumption in start-up mode Nominal power consumption...

DF plus HSTechnical data Type Accuracy class Rated torque (Mdn) Protection class (rotor) Protection class (stator) Protection class (rotor, extended) Protection class (stator, extended) Pitch circle screw information CAN Configuration interface Central hole Material Measuring range (related to Mdn) Compatible evaluation units (TCU) Stator type Sales information Article number U.S. FCC certificate ©2023, ATESTEO GmbH & Co. KG, This product data sheet was created on 06.01.2023. The information contained in the product data sheet corresponds to the status quo at the time the document was created....

#2 Second torque range #5 Pitch circle diameter #9 Temperature range (rotor) #10 Temperature range (stator) Based on customer requests, the measurement systems can optionally be optimized for not listed nominal torque values (intermediate ranges possible). The written second nominal torque value (Mdns) is the smallest possible. Greater second torque ranges can be chosen on demand. Mechanical values and load limits vary between single and dual range torque meters. A data sheet for dual range torque meters with specific values can be requested. Mechanical dimensions are without engagement. Use...