*mydirectindustry

DR2100

Product catalog summary

Overview: The DR2100 by ATEME is a cost-effective hardware Integrated Receiver Decoder/Gateway designed for efficient video distribution services. It supports a single channel platform with capabilities to receive and decode RF, ASI, satellite, or IP links.

Specifications:

Video Processing: Supports MPEG-2 and MPEG-4 AVC/H.264 standards, with resolutions up to 1080p and various frame rates.
Audio Processing: Compatible with MPEG-1 Layer II, AAC-LC, HE-AAC, Dolby Digital, and PCM pass-through.
Input/Output Interfaces: Includes Ethernet, DVB-ASI inputs, HD-SDI, HDMI, and analog video outputs. Supports Genlock synchronization and ASI output.
Supported Formats: Digital pass-through, PCM, and analog for audio outputs.
Input Modules: DVB-S/S2 and 8VSB/QAM modules with various frequency ranges and modulation standards.

Key Features:

Supports MPEG-2, H.264, SD, and HD video formats.
Offers monitoring through Front Panel, Web GUI, and SNMP interface.
Supports Closed Captions and subtitles overlays.
Decodes up to 4 RF services.
Includes a Common Interface Option and supports DVB-S2 modulation.

Benefits:

High flexibility reduces cost of ownership.
Ideal for turn-around and back-haul distribution.
Lowers operational expenses by decoding various feed types.
Easy configuration with intuitive interfaces.

Options: The DR2100 offers several upgrade options, including simultaneous SD/HD output, audio service decoding upgrades, BISS descrambling, and additional receiver modules.

Physical & Environmental: The device is housed in a 19” 1-RU chassis, operates within 0 to 50 °C, and supports a wide range of power supplies.

Catalog excerpts

Cost effective MPEG-2/MPEG-4 Integrated Receiver for smart video distribution services DR2100 is the ATEME cost-effective hardware Integrated Receiver Decoder/Gateway dedicated to efficient video distribution services. DR2100 is a single channel platform with built-in capabilities to receive and decode any RF, ASI, satellite or IP links. KEY FEATURES • Broad support of MPEG-2, H.264, SD and HD • Front Panel, Web GUI, SNMP interface for monitoring • Support of Closed Captions and subtitles overlays DR2100 is able to receive MPEG-2/MPEG-4 video feeds on 4 selectable RF inputs, 1 ASI input and 1 IP input. DR2100 offers full flexibility for output interface with a broad support of digital outputs (HD-SDI and HDMI) or analog video and audio. DR2100 is designed for SD applications and offers a software upgrade path to HD, allowing operators to leverage their existing SD infrastructures with a solution in place for HD migration. DR2100’s Integrated Receiver is the perfect solution to match professional turnaround applications and confidence monitoring. • Common Interface Option • Full support of DVB-S2 modulation and roll-off factor • High flexibility reducing cost of ownership • Perfect solution for turn-around and back-haul distribution • Lower OPEX by decoding any type of feeds • Easy configuration with intuitive interfaces

Open the catalog to page 1

RESOLUTIONS & FRAME RATES 1080i @ 25, 29.97, 30 Hz [email protected], 24, 25, 29.97, 30 Hz 720p @ 50, 59.94, 60 Hz 576i @ 25 Hz /480i @ 29.97, 30 Hz ASPECT RATIO CONVERSION Manual Selection: Letterbox, Center-Cut, Anamorphic Automatic Selection: Follows AFD Codes AUDIO PROCESSING MPEG-1 Layer II, AAC-LC, HE-AAC v1/2 Dolby Digital E, DD, DD+, PCM pass through INPUTS / OUTPUTS INTERFACES INPUT INTERFACES 2 x 10/1001000 Auto negociate /BaseT Ethernet UDP or RTP, CBR or VBR, RTP Header Extensions Supported, SMPTE 2022/CoP3 FEC Supported, Unicast or Multicast, IGMP v1, 2 & 3, up to 200 Mbps 1 x DVB-ASI...

Open the catalog to page 2

DR2100

DR2100

Catalog excerpts

All ATEME catalogs and technical brochures