ARS-S Shaft Encoder , Magnetic , 50mm body size

Product catalog summary

Overview: The document provides technical specifications and ordering information for the ARC S 50 and ARS S 50 incremental rotary encoders, which are available in optical or magnetic measurement principles with a 50 mm body size.

Technical Specifications:

Measurement Principle: Optical or Magnetic
Resolution: 4 to 10,000 pulses
Replying Frequency: 300 KHz
Temperature Range: Operating -25 to 85°C, Storage -40 to 100°C
Working Speed: Optical up to 6,000 RPM, Magnetic up to 3,000 RPM
Shaft Diameters: 6 mm, 8 mm, 10 mm

Electrical Specifications:

Supply Voltage: +5 VDC, +10VDC to 30VDC
Supply Current: 50mA nominal
Output Types: Push Pull, TTL Line Driver, Open Collector (only Optical)
Output Signals: A, /A, B, /B, Z, /Z
Output Current: 100mA max per channel
Connection: 5 or 8 x 0.14 mm² cable with shield

Output Signals and Connections:

Signal Cable Colors: A - Yellow, /B - White, +V - Red, 0V - Black, /A - Blue, B - Green, /Z - Grey, Z - Pink, Ground - Shield
Phase Output Signals: 90° phase difference

Order Coding:

Series: ARC (Optical), ARS (Magnetic)
Body Size: 50 mm
Resolution Options: Optical (100 to 2048), Magnetic (4 to 5000)
Power Supply and Output Options: PP, TTL, HTL, HPL, OCL
Output Signals: 3 (A, B, Z), 6 (A, /A, B, /B, Z, /Z)
Cable Length: 3M, 5M, 8M, 10M, S16 (M16 8Pin Socket Connector)
Shaft Diameter: 6 mm, 8 mm, 10 mm
Cable Direction: A (Backside), Y (Sidewise), AS (Backside + Spiral)
Flange Type: C (Clamping)
Shaft Type: S (Shafted)

Example Order Code: ARC-S-50-1024-PP-6-10M-A-8-C (Optical, Shafted, 50 mm body, 1024 pulse, Push-Pull, 6 Output Signals, Backside 10m cable, 8 mm shaft, clamping flange)

Contact Information: Atek Sensor Technology A.S., Tuzla, Istanbul, Turkey. Tel: +90 216 399 44 04, Fax: +90 216 399 44 02, Website: www.ateksensor.com, Email: [email protected]

Catalog excerpts

ARS-S Shaft Encoder , Magnetic , 50mm body size-1

INCREMENTAL ROTARY ENCODERS “Optical or Magnetic, 50 mm Body” Optical or magnetic principle measurement Incremental measurement 6, 8 or 10 mm shaft diameters Resolution: 4 up to 10.000 pulse 300 KHz replying frequency TECHNICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS Process Temperature Supply Voltage Stock Temperature Supply Current Push Pull, TTL Line Driver, Open Collector (Only Optical) Output Type Output Signals Working Speed Output Current Shaft Diameter Replying Frequency A, /A, B, /B, Z, /Z 100mA max. (Every Channel) 5 or 8 x 0,14 mm2 Cable with shield OUTPUT SIGNALS 90° Phase CABLE COLOR In the left tablet he cable colors of sensors output signals are given. If the control circuit is suitable in the Line Driver sensors of the not output signals (/A, /B, /Z) have to be added to the system. If it is not suitable /A, /B, /Z signal cables must be fixed as insulated separately. Don’t forget that these edges have electricity too. Red A Signal Input /A Signal Input Pink Grey /Z Signal Input Earth Line Input Channels

Open the catalog to page 1

ARS-S Shaft Encoder , Magnetic , 50mm body size-2

SAMPLE APPLICATION Clamping Flange Backside Poliemid Spiral ORDER CODING Power Supply and Output Body Size PP : 10…30 VDC Supply : 10…30VDC Output TTL : 5 VDC Supply : 5 VDC TTL Output HTL : 10…30 VDC Supply : 5 VDC TTL Output HPL : 5…24 VDC Supply : 5…24 VDC Push-Pull Output OCL : Open Collector (Only Optical) Shaft Type From 4 Pulse to 5000 Pulse Output Signals Cable Direction Flange Type A : Backside Y : Sidewise AS : Backside + Spiral Example Order Coding: Optical, Shafted, 50 mm body diameter, 1024 pulse, Push-Pull, 6 Output Signals, Backside 10 meter cable, 8 mm shaft diameter, clamping...

Open the catalog to page 2