*mydirectindustry

ARC H 100

Product catalog summary

Overview: The ARC H 100 is an incremental rotary encoder designed with a hollow shaft and a 100 mm body. It operates on an optical principle and is used for incremental measurement. The encoder supports shaft diameters ranging from 30 to 42 mm and offers a standard resolution of 1,024 pulses with a response frequency of 300 KHz.

Technical Specifications:

Process Temperature: -25 to 85 °C
Stock Temperature: -40 to 100 °C
Body Diameter: 100 mm
Response Frequency: 300 KHz
Operating Speed: Up to 6,000 RPM
Shaft Diameters: 30 mm, 32 mm, 38 mm, 40 mm, 42 mm

Electrical Specifications:

Supply Voltage: +5 VDC, +10VDC to 30VDC
Supply Current: 50mA Nominal
Output Type: Push Pull, TTL Line Driver, Open Collector
Output Signals: A, /A, B, /B, Z, /Z
Output Current: 100mA max. per channel
Connection: 5 or 8 x 0.14 mm² cable with shield

Output Signals and Connections: The encoder provides various output signals including A, /A, B, /B, Z, /Z with specific cable color coding for each signal. Proper connection to the control circuit is necessary to ensure functionality.

Mechanical Dimensions and Order Coding: The encoder is available in different configurations based on power supply, output type, cable length, hole diameter, flange type, and shaft type. The order coding system allows customization to meet specific requirements.

Contact Information: Atek Sensor Technology A.S., located in Tuzla, Istanbul, Turkey, provides contact details for further inquiries.

Catalog excerpts

INCREMENTAL ROTARY ENCODERS “Hollow Shaft, 100 mm Body” Optical Principle Incremental measurement 30 up to 42 mm shaft diameters 1.024 pulse standard resolutions 300 KHz respose frequency 100 mm body size TECHNICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS Process Temperature Supply Voltage Stock Temperature Supply Current 50mA Nominal Push Pull, TTL Line Driver, Open Collector Body Diameter Output Type Response Frequency Output Signals Output Current Operating Speed Shaft Diameter A, /A, B, /B, Z, /Z 100mA max. (Every Channel) 5 or 8 x 0,14 mm2 Cable with Shield OUTPUT SIGNALS 90° Phase CABLO COLOR The cable colors of the output signals of the left table sensor are given. If the control circuit is available, the output signals (/ A, / B, / Z) of the Line Driver sensors must be included in the system. If the control circuit is not available, the wires of the A, / B, / Z signals must be fixed separately. It should not be forgotten that there is electricity also at these edges. PLC Yeloow Blue Green White Pink Grey Shield A Signal Input /A Signal Input B Signal Input /B Signal Input Z Signal Input /Z Signal Input Earth Line

Open the catalog to page 1

ORDER CODING Power Supply and OutputSeries ARC : Optic al PP : 10...30 VDC Supply : 10...30VDC Output TTL : 5 VDC Supply : 5 VDC TTL Output HTL : 10.30 VDC Supply : 5 VDC TTL Output HPL : 5.24 VDC Supply : 5.24 VDC Push-Pull Output OCL : Open Collector Cable Length 3M : 3M (Standard) 5M : 5M 8M : 8M 10M : 10M * Optional up to 35 meters Flange Type FZ : "Z" Type Flange ARC H 100 XXX XXXl X XM X XXShaft Type H : Hollow Shaft Atek Sensor Technology A.S. Istanbul / TURKEY Tuzla Kimya Sanayicileri Org. San. Bolg. Melek Aras Bulvari, No:67 34956 Tuzla -Tel: +90 216 399 44 04...

Open the catalog to page 2

ARC H 100

ARC H 100

Catalog excerpts

All ATEK SENSOR TECHNOLOGIE catalogs and technical brochures

Archived catalogs