*mydirectindustry

Repo

Product catalog summary

Overview: The document provides technical specifications and operational guidelines for the RePo-1, a combined refractometer and polarimeter device. It measures refractive index and angle of rotation to calculate Purity, International Sugar Scale, Specific Rotation, and Concentration, with temperature displayed constantly.

Specifications:

Measurement Scales: Angle of Rotation, Brix (%), International Sugar Scale, Temperature (°C, °F).
Measurement Range: Angle of Rotation: -5 to +5°, Brix (%): 0 to 85%, Temperature: 15 to 40°C.
Display Range: Angle of Rotation: -5.99 to +5.99°, Brix (%): -2.0 to 86.6%, Temperature: 14 to 41°C.
Resolution: Angle of Rotation: 0.01°, Brix (%): 0.1%.
Accuracy: Angle of Rotation: ±0.1° (at 20°C), Brix (%): ±0.2%.
Measurement Time: 12 seconds.
Sample Volume: 3ml.
Light Source: LED, 589nm (near D-line).
Power Supply: Size AAA alkaline battery × 4.
Dimensions and Weight: 101×160×38mm, 325g.

Operational Procedure:

Fill the sample stage with approximately 3mL of liquid.
Press START to initiate measurement.
Results are displayed, with evaluation indicated by green (within tolerance) or red (outside tolerance) light.

Additional Features:

Automatic Temperature Compensation for Brix (%), Purity, and International Sugar Scale.
Measurements are rounded to 1 decimal place up to 99.9 and to a whole number above 100.
Compliance with HACCP, GMP, and GLP system standards.

Contact Information: ATAGO provides contact details for various international offices for customer service and inquiries.

Catalog excerpts

Display Purity, International Sugar Scale, Specific Rotation, and Concentration are automatically calculated from the measured refractive index and angle of rotation. Temperature is displayed constantly. Refractive index and angle of rotation are measured simultaneously. 3mL of gqSidljSall RePo-1 requires ISBftfcmeasurement.. Portable Refracto-Pal5ariMeter Evaluation Indicator Measurement evaluation is indicated by green or red light.

Open the catalog to page 1

Brix alone can only indicate the overall amount of dissolved solids in a solution. With RePo-1, it is now possible to know the actual quantities of each dissolved solids, such as fructose and glucose content, in a solution. 1. Fill the sample stage up to 2.Press START. the fill line (approx. 3mL). Press “User” to select the desired scale: Purity, International Measurements are evaluated against pre-set toleranceSugar Scale, Specific Rotation, and Concentration. limits, and the result is indicated by green or red light. (Upper and lower tolerance limits must be set in advance to using this...

Open the catalog to page 2

Repo

Repo

Catalog excerpts

All ATAGO catalogs and technical brochures

Archived catalogs