In-line Brix Monitor VARIVENT® is a registered trademark of GEA Tuchenhagen. NEW Wetted parts were flattened. The AC adapter used to convert AC100 - 240V to DC24V and to supply power to the CM-800α. Measurement scale Measurement range Brix (ATC according to the sample liquid) Brix 0.00 to 80.0% Brix 0.01 or 0.1% (With an option to display measurements between 0.00 and 9.99% to the 2nd decimal place) Measurement accuracy Brix ±0.1% Measurement temperature 5 to 100°C (ATC) Wetted parts temperature -30 to 150°C Ambient temperature 5 to 40°C Output method RS-232C, DC 4 to 20mA Prism : Sapphire Wetted parts materials Prism stage : SUS316L International Protection class IP64 Water resistant Power supply DC24V Dimensions and weight 16×17×11cm, 2.4kg (main unit only) Resolution ● Fitting Options IDF/ISO clamp union (ferrule) *Contact ATAGO for customization options. IDF/ISO screw union (screw) JIS Flange IDF/ISO screw union (screw) IDF/ISO clamp union (ferrule) Back (Detection section) *Contact ATAGO if you are interesting in using the CM series to measure other types of solution. All ATAGO refractometers are designed and manufactured in Japan. ATAGO products comply with HACCP, GMP, and GLP standards. The Front Tower Shiba Koen, 23rd Floor 2-6-3 Shiba-koen, Minato-ku, Tokyo 105-0011, Japan TEL: 81-3-3431-1943 FAX: 81-3-3431-1945 [email protected] http://www.atago.net/ * Specifications and appearance are subject to change without notice.