Automatic Digital Refractometer RX-i series
2Pages

Application examples Refractive Index Refractive Index is a common quality standard measure for pharmaceutical or chemical products. Measurements need to be taken at a constant temperature, commonly 20°C, 25°C, and 40°C. The RX-i series are equipped with the internal Peltier Thermo-Module, and measurement starts once the target temperature is reached. Funnel-type Flow Cell Used for measuring volatile substances. Choose either metal or resin. Fragrance and Food Additives Pharmaceutical Products [RE-56180] MAGIC™ (metal) [RE-56185] MAGIC™ (resin) Digital Printer DP-AD The wor ld's highest standard of technology For printing on thermal paper. Oils and Fats Beverages and Fruit Juice Jams, Honey, Liquid Sugar, Syrups Brix Brix is measured for quality control purposes in the food and beverage industries. For printing on regular paper. Printing method : Thermal dot Po w e r s u p p l y : AC adapter (AC 100V to 240V) Power consumption : 13VA Dimensions & weight : 17×16×7cm, 580g (Main unit only) Petroleum and Organic Solutions Printing method : Dot impact Po w e r s u p p l y : AC adapter (AC 100V to 240V) Power consumption : 7VA Dimensions & weight : 11×18×9cm, 470g (Main unit only) Sucrose Solution (calibration certificate optional) Condiments, Sauces, Soups Concentrations The concentrations of industrial solutions are often monitored. Examples include water-based cutting oils and cleaning solutions, hydrogen peroxide, coolants, and alcohol solutions. Although the Brix scale is commonly used, user scales can also be programmed to display converted sample values. 4 measurement mode options MODE-1 For maximum accuracy MODE-S For emulsion samples Displays the measurement value once a certain level of sample stability is achieved. Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature. Provides an option to turn the thermo-module off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed. Compatibility with harsh chemicals The wetted parts can be customized with materials that are resistant to corrosive chemicals, such as acids, bases, and solvents. Sample stage Body case • Special coatings (PEEK, PTFE, etc.) • Custom materials (Corrosion-resistant metal alloys) ATAGO offers calibration service in conformance with ISO quality management systems as well as HACCP, GMP and other standards. The following three documents will be issued. (Calibration service is performed at an additional cost.) Calibration Certificate Traceability Certificate Traceability Diagram The Front Tower Shiba Koen, 23rd Floor 2-6-3 Shiba-koen, Minato-ku, Tokyo 105-0011, Japan TEL : 81-3-3431-1943 FAX : 81-3-3431-1945 overseas@atago.net http://www.atago.net/ Measurement system : Optical-refraction critical-angle detection system Light source : LED Materials : Sample stage - SUS 316 Prism - Artificial sapphire Display : 7.5 inch color LCD (touch screen) Power supply : AC100V to 240V, 50/60Hz Power consumption : 90VA (No lower than 10°C below the ambient temperature and no higher than 55°C above the ambient temperature) Measurement items and ranges Resolution nD : 0.00001 Brix : 0.005% (The third decimal place is 0 or 5.) Temp : 0.01°C Refractive Index (nD) : 1.32422 to 1.58000 B r i x : 0.00 to 100.00% (Automatic Temperature Compensation) User scale : 100 Refractive Index (nD) : 1.32422 to 1.70000 B r i x : 0.00 to 100.00% (Automatic Temperature Compensation) User scale : 100 Refractive Index (nD) : 1.32422 to 1.70000 B r i x : 0.00 to 100.00% (Automatic Temperature Compensation) User scale : 100 nD Brix Brix Temp 2 : Factory default setting. 4 : Brix 0.00 to 50.00%, 10 to 30°C All ATAGO refractometers are designed and manufactured in Japan. Headquarters: The Front Tower Shiba Koen, 23rd Floor 2-6-3 Shiba-koen, Minato-ku, Tokyo 105-0011, Japan TEL : 81-3-3431-1943 FAX : 81-3-3431-1945 ATAGO products comply with HACCP,GMP, and GLP system standards. Measurement accuracy 1 : When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C. 3 : nD 1.33299 to 1.42009, 10 to 30°C. For other ranges, (nD) ±0.00010 *±0.00005 5 : Brix 50.01 to 95.00%, 10 to 30°C. For other ranges, Brix ±0.10% *±0.02% http://www.atago.net/ overseas@atago.net • Custom materials (PVC resin, fluorine resin, etc.) Ambient Temperature : 5 to 40°C Output terminals : Printer - RS-232C, Computer - USB Temperature control range : 5.00 to 75.00°C Refractive Index (nD) : 1.32422 to 1.58000 B r i x : 0.000 to 100.000% (Automatic Temperature Compensation) User scale : 100 • Special coatings (PEEK, PTFE, etc.) Cover plate ATAGO taking refractometers to the next level. Custom concentrations are available upon request. Accuracy and prices will vary by concentration. Contact ATAGO for more details. Common features Displays the measurement value once the sample reaches the target temperature. solution solution solution solution solution now available with touch screen. For the utmost in customer satisfaction... Regular inspection of the RX-i unit is highly recommended. Use one of the following solutions to confirm the calibration. [RE-111001] 10% sucrose [RE-112001] 20% sucrose [RE-113001] 30% sucrose [RE-114002] 40% sucrose [RE-115002] 50% sucrose Shelf life is 10 days. Chemical Solutions Digital Refractometers Save time with the flow cell! No need to clean the prism between measurements.

Digital Refractometers PRESENT HISTORY Experience the ease of touch-screen technology. OUT OF RANGE 20.00 OUT OF SCALE 20.00 OUT OF WATER 20.00 ZERO SET END 10.005 10.030 10.020 Our world-class precision instrument continues to advance. Brix Brix ERROR DATA FULL RESULT CLEAR Home Screen Measurement History High Security The illustrated home screen makes it easy to identify the operation of your choice. All basic operations - selecting scales and modes, taking and recalling measurements, and zero-setting - are at the tip of your finger. Recall the last 500 measurements. Exporting data to a...