VEGO Series – A New Generation of Handling Modules Walkthrough Telescope Gate within production lines VEGO Dynamic Description The TDM 06 walkthrough telescope gate provides an intermediate passageway through a production line with no lasting effect on the production flow. The basis model consists of a telescopic conveyor with a horizontal moving conveyor mechanism. The PCB is taken over at the inlet and the horizontal conveyor extends to hand over the PCB to the downstream system. After handover, the conveyor retracts, thus opening the passageway again. This operating mode means that the passageway is only closed during PCB handover (NO- mode). An optional conveyor with lift mechanism is also available which rises to bridge the gap to the upstream machine when the bridge conveyor is extended. In this configuration, the passageway is generally closed (NC-Mode) which allows the PCBs to pass directly through the machine and results in a considerable reduction in the cycle time. Features _ Colour display with graphical user interface _ Product parameters can be changed during running operation _ Product memory function _ Electrical width adjust _ Adjustable passageway width (only with NO- Mode) _ Available in version „open right“ or „open left“ _ Operating mode: - NO: The passageway is open and is only closed for PCB handover. _ Cycle time < 15s Options _ Transport height 950mm +/- 50mm _ Automatic width adjust _ Inspection mode _ Lift conveyor including the operating modes NC and NC/NO - NC: The passageway is closed and is only opened on demand (push button). - NC/NO: The passageway is open and adapts to the line cycle time i.e. with cycle times < 15s, the passageway stays closed and opens again when the cycle time increases. _ Speed adjustment for oven takeover/handover _ Integrated shuttle für dual lane o

Machine Configuration Transport height Max. transport width Interface Transport path Transfer direction Operating side Fixed rail 850 mm ± 50 mm 460 mm SMEMA, Siemens 790 mm from left to right Front of the machine Front of the machine 850 mm ± 50 mm 460 mm SMEMA, Siemens 995 mm from left to right Front of the machine Front of the machine Panel Dimensions Panel length Panel width Panel thickness Component clearance Panel weight Installation Requirements Power supply Power supply system Power consumption Air supply Air consumption Machine Description Length x Width x Height Netto weight Color Noise...