VEGO Series – A New Generation of Handling Modules VEGO Dynamic Description The LSB03 is used to load bare boards for printing or marking into SMT production lines. The PCB stack is manually loaded into the machine and the individual PCBs are handed over to the downstream system on a transfer conveyor. The stack is processed from above which ensures gentle separation of the PCBs. The machine can be equipped with various methods of separation depending on the type of PCB used. Features _ Colour display with graphical user interface _ Product parameters can be changed during running operation _ Product memory function _ Separation with either a clamp or vacuum mechanism _ Processing of stack from above _ PCB alignment before separation _ No PCB length or thickness data required _ Electric width adjust _ 2 colour signal lamp (LED) and alarm horn _ Small footprint Options _ Transport height 950mm +/- 50mm _ Automatic width adjust _ Pass-through and mix-mode (automatic switchover) _ Combined clamping/vacuum head _ Loading head for stack _ FIFO loading head _ Pre-warning limit alarm for stack empty _ Inlet/outlet conveyor _ Loading lift for magazines _ Centre support for flexible PCBs _ Equipment for thin PCBs (<0.7mm)

Machine Configuration Transport height Max. transport width Interface Transfer direction Operating side Fixed rail 850 mm ± 50 mm 460 mm SMEMA, Siemens from left to right Front of the machine Front of the machine 850 mm ± 50 mm 460 mm SMEMA, Siemens from left to right Front of the machine Front of the machine Panel Dimensions Panel length Panel width Panel thickness Component clearance (by-pass) Panel weight Max. stack height Max. stack weight Edge support (pass through) Edge support (stack) Installation Requirements Power supply Power supply system Power consumption Air supply Air consumption...