VEGO Series – A New Generation of Handling Modules Magazine loader with magazine buffer and automatic magazine change Description The unit consists of a loading and an unloading conveyor for magazines,a lifting axle with a magazine platform, a receiving conveyer for the PCB’s from the previous unit and an electrically driven pusher. The unloading conveyors are situated parallel to each other on the lower level and the loading conveyors are situated directly above. The Magazines are transported over the loading conveyor and clamped in place. The pusher then slides the PCB’s into the magazine. The full magazine is then transported over the lower (unloading) conveyor and stored until manual removal. Features _ Automatic magazine change with magazine clamps at the top and the bottom _ Loading and unloading conveyers situated next to each other on the same level _ Transfer height for magazine tracks is the same on both conveyors _ Double lift axle model Options _ Transport height 950 mm ± 50 mm _ Magazine adaptation _ Electric width adjustment _ Automatic width adjustment _ Multiple output _ Re-insertion mechanism _ Universal magazine clamp

Machine Configuration Transport height Transfer direction Operating side Fixed raiI SMEMA, Siemens from left to right Magazine Size Buffer spacing 1-50 Slots Magazine buffer input conveyor 3 Magazine buffer output conveyor 4 Panel Dimensions Panel length Panel width Panel thickness Component clearance Panel weight Installation Requirements Power supply Power supply system Power consumption Machine Description Length xWidth x Height Netto weight Noise Leve Basic Light a) other dimensions on request ASYS Automatisierungssysteme GmbH For more information visit Subject to change without notice. Some...