VEGO Series - A New Generation of Handling Modules Transfer unit used to connect corners or crossings VEGO Dynamic iFasta nschlig The AEM 02 is used for changing the direction in production ines. Subsequently, it can also be used to split or combine ines.The integrated rotating and linear drive means that the system provides you with great flexibility. The machine is based on a stable steel tubing system which can support up to 4 additional inlet/outlet conveyors. The assembly is taken over onto the inlet conveyor and depending on the selected operating mode, is either turned or transported in a straight line through the machine to the corresponding downstream system. _ Colour display with graphical user interface _ Product parameters can be changed during running operation _ Product memory function _ Symmetrical system design ndividual configuration of the inlets and outlets _ Operating modes: _ Electrical width adjust _ Automatic width adjust _ Loading lift for magazines _ Inlet/outlet conveyor _ Sorting function (Good/Bad,Top/Bottom) _ Safety shutter at inlet and/or outlet) _ 2 colour signal lamp (LED) _ Inspection function _ Speed regulation for oven transfer

Type 1 Machine Configuration Transport height Max. transport width Interface Transfer direction Operating side Fixed rail 850 mm ± 50 mm 460 mm SMEMA, Siemens from left to right Front of the machine Front of the machine Panel Dimensions Panel length Panel width Panel thickness Component clearance Panel weight Installation Requirements Power supply Power supply system Power consumption Air supply Air consumption Machine Description Length x Width x Height Netto weight Color Noise Level Upgrades Machine networking via IC Net For more information visit www.asys-group.com Subject to change without...