Automation Systems INSIGNUM Series - Power and Precision in Marking Reading System INSIGNUM Scan Options _ Electrical width adjust _ Automatic width adjust _ Scanning from above _ Scanning from below _ Scanning from above or below _ Double track operation _ Inspection mode _ Good / bad sorting _ X-Y stepper motor axes above _ X-Y stepper motor axes below _ Database connection Description The Reading System, INSIGNUM 3000 Scan, consists of a stepper motor driven X/Y-axle-system with scanner or camera. The product is transported on the conveyor and up against a stopper. The scanner moves into position dependent upon the product, and scans the barcode or the data-matrix code and transmits the information to the database or the network. After the scanning process, the product is transported to the following unit. Features _ PC controlled unit _ Database and network connections _ 2 independent X/Y-scanner axles _ Product information is read in from the previous marking unit _ Multiple scan positions per product are possible. _ Automatic scanner positioning

INSIGNUM 3000 Scan Type 1 Machine configuration Transport height Max. transport width Interface Scan area above Scan area below Transfer direction Operating side Fixed rail 850 mm ± 50 mm 460 mm Siemens, SMEMA, SMPI, Panasonic, Fuji, Sanyo 250 x 460 mm 250 x 460 mm From left to right / from right to left Front of the machine Front of the machine 850 mm ± 50 mm 460 mm Siemens, SMEMA, SMPI, Panasonic, Fuji, Sanyo 320 x 460 mm 320 x 460 mm From left to right / from right to left Front of the machine Front of the machine 850 mm ± 50 mm 460 mm Siemens, SMEMA, SMPI, Panasonic, Fuji, Sanyo 460 x 460...