Automation Systems DIVISIO Depaneling Systems Compact Depaneling System DIVISIO 3000 Series Description The DIVISIO 3100 is based on a rigid, stable substructure of a welded steel construction. It is equipped with a X/Y/Z axis system above the transportation level. PCB positioning is done with an integrated stopper unit mounted at the X-axis. Therefore routing could be done at free definable Y-positions. Restriction is that no waste could be handled (e.g. borders, waste corners). With the devided transport system inside the machine the PCB can be separated. Subsequently the routed PCB can be transfered out of the machine. The manual width adjustment is done by a clamping lever. Features _ Linear driven X/Y-axis _ Servo driven Z-axis _ No routing spindle _ Disc spindle (on request) _ Ionization unit _ PC controlled machine with Windows based operating software _ safety doors with interlock switches Options _ Camera system for automatic cut inspection _ Quick exchange head (Routing / Sawing) _ Pass / Fail interface _ Traceability function _ Sawing disc break monitoring _ Camera system for : + Fiducial recognition + Cut control + Teach function + Camera correction + Bad-mark recognition + Code read _ Programable stopper _ Automatic width adjustment

DIVISIO 3100 Routing and/or sawing 50 to 360 mm 50 to 330 mm 0.8 to 4.5 mm 4,5 kg 2,25 kg 8 mm; partial 18 mm (other height on request) 40 mm Machine Configuration Transport height Max. transport width Operating side Panel Dimensions Panel length Panel width Panel thickness Panel weight max. PCB weight max. Component height, spindle-side Component height, transport-side Installation Requirements Power supply Power supply system Fuse protection Power consumption Air supply Air consumption Machine Description Length x Width x Height Weight Speed X Speed Y Speed Z Acceleration X Acceleration Y Acceleration...