Automation Systems DIVISIO Depaneling Systems Semi-automatic Depaneling System DIVISIO 2000 Series Description The DIVISIO 2000 is a semi-automatic system for stress-free depaneling of PCBs. The X- and the Y-axes are both equipped with highly dynamic linear motor technology, the Z-axis is servo-driven. Already existing product carrier adapters can easily be used with this machine. The vacuum system is optimized with the help of the Tornado-Effect. The system offers a cost-efficient solution for customers who wish to depanel stress-free but who do not produce such a high volume to justify the acquisition of an inline machine. By positioning the routing axis either above or below the electrically driven rotary table the DIVISIO 2100 has the flexibility to represent a verified production process. It can therefore be used without any restrictions as back-up for the inline production. The DIVISIO 2300 commands the largest working area within the entire DIVISIO depaneling systems. Features _X- and Y-axis with high-end linear motors _Z-axis servo-motor-driven _Rotary-table with two working areas _Touch screen monitor _HMI offers comfortable operation _Ionization unit _Automatic tool change with 2 routers per magazine _Complete tool management + Breakage control + Length verification + Diameter check + Life span monitoring + Dynamic utilization of full router bit _ Automatic maintenance schedule Options _Routing module (from top / bottom) or sawing unit (from top) _Program creation with ASYCAM CAD import _Camera system + Fiducial recognition + Cut control + Program creation with teach function + Camera correction + Bad mark recognition + Code reading _Vacuum exhaust system _Manual suction unit _Low pressure control _Adapter technology: + Product-specific adapters + Flexible adapter functions + Adapter coding for up to 255 adapters _Upgrade of Automated Router bit change to 8 bits _Traceability function _Database Interface

Routing and/or Sawing Routing Machine Configuration Transport height Operating side Panel (max. LxB) Routing from top Routing from bottom Sawing from top in Y or X Sawing from top in X and Y NC-Axis 850 mm ± 50 mm Front of the machine 460 x 460 mm 460 x 460 mm 460 x 460 mm 460 x 460 mm (Option) 460 x 360 mm (Option) Panel Dimensions Panel length Panel width Panel thickness Panel weight max. Component height, spindle-side Component height, adapter-side 50 bis 460 mm 50 bis 360 mm 0.5 bis 4.5 mm 4,5 kg 8 mm; partial 18 mm (other height on request) 40 mm; partial 70 mm (depending of fixing pins)...