ASYS Group Technologies ARS02_01_11_07_E ARS 02 Reading system Professional Series Description The unit consists of a stepper motor driven X/Y-axlesystem with scanner or camera. The product is transported on the conveyor and up against a stopper. The scanner moves into position dependent upon the product, and scans the barcode or the data-matrix code and transmits the information to the database or the network. After the scanning process, the product is transported to the following unit. Features _ PC controlled unit _ Database and network connections _ 2 independent X/Y-scanner axles _ Product information is read in from the previous marking unit _ Multiple scan positions per product are possible. _ Automatic scanner positioning Options _ Electrical width adjust _ Automatic width adjust _ Scanning from above _ Scanning from below _ Scanning from above or below _ Double track operation _ Inspection mode _ Good/bad sorting _ X-Y stepper motor axes above _ X-Y stepper motor axes below _ Database connection

Type 1 Type 2 Type 3 Machine Configuration Transport height Max. transport width Interface Scan area above Scan area below Transfer direction Operating side Fixed rail 850 mm ± 50 mm 460 mm Siemens, SMEMA, SMPI, Panasonic, Fuji, Sanyo 250 x 460 mm 250 x 460 mm from left to right Front of the machine Front of the machine 850 mm ± 50 mm 460 mm Siemens, SMEMA, SMPI, Panasonic, Fuji, Sanyo 320 x 460 mm 320 x 460 mm from left to right Front of the machine Front of the machine 850 mm ± 50 mm 460 mm Siemens, SMEMA, SMPI, Panasonic, Fuji, Sanyo 460 x 460 mm 460 x 460 mm from left to right Front of the...