- Catalogs
- ASTREL GROUP SRL
- zigbee smart building
zigbee smart building
zigbee smart building
- The devices measure temperature, humidity, and light, transmitting data to a ZigBee gateway.
- Sampling intervals and data transmission settings are customizable to extend battery life.
- They are battery-powered, suitable for indoor and outdoor use, and housed in waterproof plastic.
- Internal antenna provides a radio range of up to 30 meters outdoors.
- These devices are ideal for building automation, industrial control systems, and energy monitoring and management.
- Utilizes the Ember EM250 chip, compatible with IEEE 802.15.4, operating on the ZigBee PRO stack.
- Radio frequency ranges from 2405 MHz to 2480 MHz with DSSS modulation.
- Powered by a 3.6 V / 2000 mAh AA lithium battery, with a battery life of 3 years under specific conditions.
- Temperature sensor range: -40 to 120 °C with an accuracy of ±1.5 °C.
- Humidity sensor range: 0 to 100% RH with an accuracy of ±5 RH%.
- Light measurement error is ±5% over a range of 10 to 1000 Lux.
- Complies with ETSI and EN standards, including RED, RoHS, and WEEE directives.
- ZED-THL-M: Temperature, humidity, and light sensor – Modbus.
- ZED-THI-M: Temperature and humidity sensor – Modbus.
- Dimensions and weight vary slightly between models.
- ZigBee Modbus Module with digital inputs for ON/OFF status and temperature readings from NTC probes.
- Wireless thermostat for indoor air conditioning control with a touch interface and relay control.
- ZigBee Modbus pulse counters for energy meter pulses and temperature measurement with NTC probes.
- CO2 sensor for measuring carbon dioxide concentration, featuring auto-calibration and long-term stability.
This document provides technical specifications and descriptions for various ZigBee-enabled devices used in smart building automation and energy management systems. The devices include CO2 sensors, Modbus modules, smart plugs, smart switches, Modbus bridges, and radio repeaters.
- Powered by 4x AA batteries with a life of 1 year.
- Features 4 indicator LEDs for status display.
- Default sampling interval is 15 minutes.
- Uses EE893-05C2 sensors with double NDIR wavelength.
- Measurement range: 0~2,000 ppm (optional up to 10,000 ppm).
- Accuracy: ± (4% FS +3% Reading).
- Wall-mounted with screws, operating temperature: 0 to +50 °C.
- Protection: IP30, Insulation Class III.
- Features 2 digital inputs, 1 NTC probe input, and 2 relay outputs.
- Sampling interval is customizable to increase battery life.
- Applications include building automation and energy monitoring.
- Powered by 24 VDC, with Italian or UK standard plugs.
- Protection: IP51, Insulation Class II.
- Features a power relay with a built-in energy meter, max power 13 A @ 230 VAC.
- Functions include router, stand-by killer, and override.
- Uses Modbus protocols.
- Protection: IP33, Insulation Class III.
- Features a power relay with a built-in energy meter, max power 13 A @ 230 VAC.
- Functions include router, stand-by killer, and override.
- Wall-mounted, uses Modbus protocols.
- Protection: IP30, Insulation Class I.
- Connects third-party Modbus/RTU devices to the ZigBee network.
- Features RS485 interface, routing functionality, and an external antenna.
- Applications include building energy management and automation systems.
- Protection: IP51, Insulation Class II.
- Extends the range of wireless devices.
- Features routing functionality and an external antenna.
- Applications include building automation and energy monitoring.
- Protection: IP51, Insulation Class II.
All devices conform to various ETSI, EN, and EU directives, ensuring compliance with safety, electromagnetic compatibility, and environmental standards.
Catalog excerpts
zigbee smart building Zigbee wireless diveces for energy saving and comfort living Ideal for: – temperature, humidity and light sensors – CO2 sensors – NTC temperature probes – single-phase and three-phase energy meters
Open the catalog to page 1
zigbee smart building A line of devices based on ZigBee technology for projects focused on energy saving and environmental comfort. Dedicated to system integrators on the lookout for wireless solutions offering low energy consumption and high reliability, our ZigBee radio devices guarantee extensive radio coverage creating mesh type networks. Wireless sensors, for energy and comfort Thermostats, energy meters, temperature, presence, brightness and CO2 sensors, smart plugs, switches incorporating energy and power meters: a complete catalogue of wireless devices for smart building projects focused...
Open the catalog to page 2
BlackBox – ZigBee Ethernet Modbus Gateway ZigBee RS485 Modbus Gateway Energy Meter 1~ ZigBee Modbus ZigBee Modbus Energy Meter 3~ / 6~ ZigBee Modbus Temperature, humidity and light sensors TID – ZigBee Modbus Module with digital inputs TTR2 – ZigBee Modbus wireless thermostat ZigBee Modbus Pulse counters Modbus CO2 Sensor TIR2 – ZigBee Modbus Relay Module Modbus Smart Plug Modbus Smart Switch ZigBee Modbus Bridge ZigBee Modbus radio repeaters ZigBee smart building
Open the catalog to page 3
BlackBox – ZigBee Ethernet Modbus Gateway BlackBox is a ZigBee Modbus gateway with an Ethernet connection, and is mainly used to route data from ZigBee sensors monitoring environment and energy parameters and to control electrical devices and/or signalling systems. BlackBox connects ZigBee low energy wireless device networks (comprising sensors, actuators, pulse counters, etc.) to cabled networks via Modbus TCP/IP protocol. The device also permits asynchronous data acquisition from network nodes and high efficiency transmission direct to the supervisor. Modbus protocol gateways ensure the easy...
Open the catalog to page 4
BlackBox CONNECTION DIAGRAM ModBus sensor ModBus sensor radio repeater ModBus sensor third-party ModBus devices (general purpose I/O, power meter, regulator) TECHNICAL SPECIFICATIONS Type General specifications Radio specifications Antenna Power supply Status display Connections Mounting Ambient parameters Features – Silicon Labs chip – Compatible with IEEE 802.15.4 – Stack EmberZnet 6.4.1 – Modbus / RTU – Frequency: 2405 MHz to 2480 MHz – Modulation: DSSS – Nominal transmission power: 10 dBm – Receiver sensitivity -90 dBm – External with 2 dB gain – Radio range: max 50 m outdoors – SMA-RP antenna...
Open the catalog to page 5
CODE Product Code ZC-GW-BB-EM Description BlackBox – ZigBee Modbus Gateway with Ethernet connection ZigBee smart building - +80A000131R1.0 - 2020|07|29
Open the catalog to page 6
Gateway ZigBee ZigBee RS485 Modbus Gateway These gateways are mainly used to route data from sensors monitoring environment and energy parameters and to control electrical devices and/or signalling systems. They connect ZigBee low energy wireless device networks (comprising sensors, actuators, pulse counters, etc.) to cabled networks via Modbus RS485 protocol. These gateways also permit asynchronous data acquisition from network nodes and high efficiency transmission direct to the supervisor. Modbus protocol gateways ensure the easy integration of ZigBee wireless devices with third party systems...
Open the catalog to page 7
Gateway ZigBee CONNECTION DIAGRAM ModBus sensor ModBus sensor radio repeater ModBus sensor third-party ModBus devices (general purpose I/O, power meter, regulator) TECHNICAL SPECIFICATIONS Type General specifications Radio specifications Antenna Power supply Features – Ember EM3587 chip – Compatible with IEEE 802.15.4 – Stack EmberZnet 5.3.1 (ZigBee PRO) – Modbus / RTU – Frequency: 2405 MHz to 2480 MHz – Modulation: DSSS – Nominal transmission power: 1 mW (0 dBm) – Receiver sensitivity: -92 dBm – External with 5.5 dB gain – Radio range: max 70 m outdoors – SMA-RP antenna connector – ZC-GW-P485-EMxx...
Open the catalog to page 8
Gateway ZigBee Type Insulation Conformity CODES Products Description Modbus RS485 gateway; 12 to 24 VDC power supply; Italian standard power plug Modbus RS485 gateway; 230 VAC power supply; UK standard power plug ZC-GWP485D-EM Modbus RS485 gateway for DIN rail; 230 VAC power supply ZigBee smart building - +80A000131
Open the catalog to page 9
Energy Meter 1~ ZigBee Modbus Wireless energy meter for measuring the power of a load/single phase line up to 15 kW using a split core current transformer (TA) In industrial applications, the device can be used to monitor a production line or a lighting line inside or outside a section. The device is fitted with a digital output for controlling an external, high power relay. Thanks to continuous power, the device can also function as a ZigBee signal repeater and as a parent device for battery powered sensors. Energy Meter 1~ for one single phase line up to 15 kW – Modbus MAIN TECHNICAL SPECIFICATIONS...
Open the catalog to page 10
Energy Meter 1~ CONNECTION DIAGRAM ModBus sensor ModBus sensor ModBus sensor third-party ModBus devices (general purpose I/O, power meter, regulator) TECHNICAL SPECIFICATIONS Tipo General specifications Radio specifications Caratteristiche – Chip Ember EM3587 – Compatible with IEEE 802.15.4 – Stack EmberZnet 5.3.1 (ZigBee PRO) – Modbus / RTU – Frequency: 2405 MHz to 2480 MHz – Modulation: DSSS – Nominal transmission power: 2 mW (3 dBm) – Receiver sensitivity: -95 dBm – Radio range: – 50 m outdoor – 20 m indoor Power supply Max current Status display Sampling / data transmission time Measurements...
Open the catalog to page 11
Energy Meter 1~ Tipo Degree of protection Insulation Conformity – ETSI EN 300 328 – ETSI EN 301 489-1 – ETSI EN 301 489-17 – EN 61326-1 – EN 61010-1 – EN 62479 – Directives 2014/53/EU (RED) 2011/65/EU (RoHS) 2012/19/EU (WEEE) 1999/519/EC CODE Product Code ZR-HM.D-M Description Energy Meter 1~ for one single phase line up to 15 kW – Modbus ZigBee smart building - +80A000131R1.0 - 202
Open the catalog to page 12All ASTREL GROUP SRL catalogs and technical brochures
Rialto flush-mounted devices2 Pages
Touch the difference8 Pages
4-nocks An elios-centric home16 Pages
