*mydirectindustry

HD44.44

Product catalog summary

Chassis Specifications:
The document outlines the specifications for a 4x4 chassis compliant with EURO 3 standards. It includes turning diameters for various wheelbases, dimensions, and weight distributions. The gross vehicle weight and gross combination weight are specified, with variations based on axle configurations and optional equipment.

Engine and Performance:
The vehicle is equipped with a CURSOR 13 turbo intercooler engine, delivering 324 kW (440 HP) at 1900 rpm and a maximum torque of 2100 Nm. The engine features a VGT and electronic unit injection pumps.

Transmission:
A manual ZF 16S2220TO Ecosplit 4 technology gearbox with 16 synchronized forward speeds and 2 reverse is standard, with an option for an automated ZF ASTRONIC gearbox.

Axles and Suspension:
The front axle is driving and steering with double reduction, and the rear axle also features double reduction. Optional configurations include cross-axle differential locks and reinforced suspensions.

Chassis and Tyres:
The chassis is constructed from high tensile strength steel with specific dimensions. Various tyre configurations are available, subject to technical approval.

Braking System:
The vehicle features front and rear drum brakes with an ABS + EBL system. The service brake is air-controlled, and the parking brake is mechanical with pneumatic control.

Electrical System:
The electrical system operates at 24 V with a 90 A alternator and 180 Ah accumulators.

Cab Features:
The cab is a standard white short cab with hydraulic tilting, equipped with various comfort and safety features including adjustable seats and a ventilation system.

Additional Notes:
The document emphasizes that all data are indicative and non-binding, and final testing is required to verify payload and vehicle dimensions. Changes to characteristics and equipment can occur without prior notice.

Catalog excerpts

TURNING DIAMETER (wall to wall) (*) M max.: indicative value to be confirmed by bodybuilder. (Tyres 315/80R22.5). First axle Rear axles First axle Max technical weight Gross Rear axles Vehicle Weight 13000 21000 (3) Gross Combinatio n Weight 55000 (*) Net weight including driver with tanks filled to at least 90%, equipped with standard equipment according to the manufacturer's specifications and, if fitted, the mass of the bodywork, spare wheels and tool box. (1) With tyres on front axles 385/65R22.5 or 325/95R24 and reinforced springs (OPT). (2) With Kessler front axle and max speed limited to 70 km/h, depending on tyre type and brand. (3) Higher speeds/loads are allowed with load/speed reductions, subject to Astra technical office approval. The data shown are indicative and non-binding. 12 - 2021 Payload and vehicle dimension data must always be verified during final testing. ENGLISH Do not use the drawing in the present sheet to design the equipment. Astra reserves the right to make any changes at any time and without notice. Characteristics and equipment are subject to changes without prior notice

Open the catalog to page 1

ENGINES CURSOR 13 turbo intercooler euro 3 diesel injection/cycle with electronic unit injection pumps. Single block head, four valves per cylinder, light alloy pistons. Total displacement: 12.882 cm3. Bore for stroke: 135 x 150 mm. 6 in-line cylinders. Water cooling. Dry air filter with safety cartridge. Vertical muffler. Max.power(EEC) Max.torque(EEC) Turbine GEARBOX Manual ZF 16S2220TO Ecosplit 4 technology gearbox with servoshift, 16 synchronised forward speeds + 2 reverse: On request: Automated ZF ASTRONIC 16AS2630TO, 16 synchronised forward speeds + 2 reverse. CLUTCH Single dry plate, diameter...

Open the catalog to page 2

HD44.44

HD44.44

Catalog excerpts

All ASTRA VEICOLI INDUSTRIALI S.P.A. catalogs and technical brochures

Archived catalogs