Catalog excerpts
MAGNETIC CHIP CONVEYOR Magnetic chip conveyors are designed to convey either dry or wet ferrous parts or chips and turnings waste from metal working machinery. Magnetic chip conveyors are available in three different dimension series conforming to working load: ■■For light or medium use (conveying load 500 kg / h and less) – DM 97 ■■For moderate heavy use (conveying load up to 900 kg / h) – DM 125 ■■For heavy industrial use (conveying load up to 2 000 kg / h) – DM 225 steep 1 angle conveyor steep 2 angle conveyor direct conveyor We fabricate the conveyors in three forms: The conveyors are outfitted with either a permanent ferrite magnets, permanent neodymium magnet or specific magnets such as samarium cobalt magnets with higher temperature ratings and higher coerciv
Open the catalog to page 1This type of magnetic conveyor is mainly used in gear cutting industry where the technology of the cutting or sawing of ferrous magnetic materials is applied. It is used for conveying the short and fine ferrous chips. WIDTH OF WORKING LOAD AREA S mm WIDTH OF THE CONVEYOR WITH THE EXTERNAL TENSIONING DEVICE S+81 mm LENGTH Lm mm AXIAL LENGTH L mm AXIAL LENGTH OF CORNER UNIT X mm AXIAL LENGTH OF CORNER UNIT Y mm PITCH OF THE MAGNETIC RAILS t " MOTOR INPUT P kW SPEED OF CONVEYED MATERIAL v m/min MAXIMAL LENGTH IL mm MAXIMAL LENGTH...
Open the catalog to page 2DM DM 125 This type of magnetic conveyor is mainly used in gear cutting industry where the technology of the cutting or sawing of ferrous magnetic materials is applied. It is designed to convey medium large chips, stamping scrap, bolts, nails etc. DIMENSIONS DM 125 WIDTH OF WORKING LOAD AREA S WIDTH OF THE CONVEYOR WITH THE EXTERNAL TENSIONING DEVICE S+103 LENGTH Lm AXIAL LENGTH L AXIAL LENGTH OF CORNER UNIT X AXIAL LENGTH OF CORNER UNIT Y PITCH OF THE MAGNETIC RAILS t MOTOR INPUT P SPEED OF CONVEYED MATERIAL v MAXIMAL LENGTH XL REPOSE ANGLE a
Open the catalog to page 3DM DM 225 This type of magnetic conveyor is suitable for conveying of bulk loads, scrap from large stamping facilities and for transport of large amounts of ferrous magnetic material. DIMENSIONS DM 225 WIDTH OF WORKING LOAD AREA S mm WIDTH OF THE CONVEYOR WITH THE EXTERNAL S+143 mm TENSIONING DEVICE LENGTH Lm mm AXIAL LENGTH L mm AXIAL LENGTH OF CORNER UNIT X mm AXIAL LENGTH OF CORNER UNIT Y mm PITCH OF THE MAGNETIC RAILS t " MOTOR INPUT P kW SPEED OF CONVEYED MATERIAL v m/min MAXIMAL LENGTH IL mm REPOSE ANGLE a °
Open the catalog to page 4All ASTOS Machinery catalogs and technical brochures
-
SCRAPER CHIP CONVEYORS
4 Pages
-
CAROUSEL CHIP CONVEYOR
2 Pages
-
BAND FILTER
2 Pages
-
MAGNETIC SEPARATOR
1 Pages
-
FILTRATION STATIONS
2 Pages
-
BAND DRUM FILTRATION
1 Pages
-
JIB CRANES
1 Pages
-
PF - Band filters
2 Pages
-
CDT – for CNC machines
4 Pages