PHSS4x (LDM)
2Pages

Catalog excerpts

Angewandte Sensortechnik he housing PHSS4x is to protect the sensors of the LDM4x series from humidity and dirt. It is made of very robust stainless steel (V2A), and it is perfectly suited to outdoor use. The window that has been adjusted to the laser’s wavelength range can easily be cleaned. The serial programming interface of the sensor is permanently available at an external port. Power supply and further signals are connected via cable lead-through at an internal terminal block. The sensor can be built in directly ex works. Customized, special versions are possible upon request. Technical Data Protection class IP 69K for the housing IP 67/68 in accordance with the connection type Dimensions 300 mm × 200 mm × 120 mm (W × H × D, without ports) Mounting 4x M6, 260 mm × 220 mm Weight 3500 g (without the built-in sensor) Material Stainless steel (V2A) Window material Special glass anti reflex coating on both sides ASTECH Angewandte Sensortechnik GmbH Properties Protect the LDM41/42 from humidity and dirt Programming interface at an external port

Open the catalog to page 1

Assignment of internal terminal Terminal Cable Color LDM4x A Assignment Pins LDM4x A Connector Pin-Number Color intern Assignment The connection interface is available only for sensors with RS232. The interface is protected with a cap against dirt. A programming cable can be ordered optionally. ASTECH Angewandte Sensortechnik GmbH ■ +49 38144073-0 ■ info@astech.de ■ www.astech.de

Open the catalog to page 2

PHSS4x (LDM) 2Pages

Catalog excerpts

All ASTECH Angewandte Sensortechnik GmbH catalogs and technical brochures

PHSS4x (LDM)
2Pages