Angewandte Sensortechnik he housing PHSS30x is to protect the laser distance sensors of the LDM30x serie from humidity and dirt. It is made of very robust stainless steel (V2A), and it is perfectly suited to outdoor use. The window that has been adjusted to the laser’s wavelength range can easily be cleaned. The serial programming interface of the sensor is permanently available at an external port. Power supply and further signals are connected via cable lead-through at an internal terminal block. The sensor can be built in directly ex works. Customized, special versions are possible upon request. Technical Data Protection class IP 69K for housing and window IP 67/68 accordance with the connection type Dimensions 300 mm × 200 mm × 120 mm (W × H × D, without ports) Mounting 4x M6, 260 mm × 220 mm Weight 3500 g (without built-in sensor) Material Stainless steel (V2A) Window material Special glass with anti reflex coating on both sides ASTECH Angewandte Sensortechnik GmbH Properties Protect the LDM30x from humidity and dirt Programming interface at an external port

Assignment of internal terminal Terminal Cable Color LDM30x Assignment Pins LDM30x Connector Pin-Number Color intern Assignment The connection interface is available only for sensors with RS232. The interface is protected with a cap against dirt. A programming cable can be ordered optionally. ASTECH Angewandte Sensortechnik GmbH ■ +49 38144073-0 ■ [email protected] ■ www.astech.de