DATASHEET CR-TBox Angewandte Sensortechnik CR-TBox Remote control and visualization he CROMLAVIEW® color sensors CR100, CR200 and CR210 have special modes, in which they can be addressed via trigger inputs. They are usually controlled by a SPS. Though for particular cases, for example at manual test stations, these functions can also be controlled manually, by a control unit that is separated from the device. On trigger T1 the output is updated, when the mode “triggered externally” is set on the sensor. Furthermore, on T2 a teaching process is triggered, when the mode "External Teach In" is set. This can be useful, when a reference color is to be taught in for the following objects that need to be tested. The advantage of using this unit instead of the buttons on the sensor is the fact that no other parameters can be changed. For the visualization of the detected colors there are 4 LEDs for the display of four colors, respectively for up to 15 colors with binary encoding. Key Features 2 buttons for the trigger inputs of the CROMLAVIEW® sensors CR100, CR200 und CR210 For the visualization of the switching states of the output lines For teaching in or overwriting color values without accidentally changing other parameters CROMLAVIEW CR-TBox ASTECH Angewandte Sensortechnik GmbH

DATASHEET CR-TBox Angewandte Sensortechnik Technical Data Interfaces 6 LEDs for switching outputs and button status Protection standard Power supply Case temperature during operation Case material Aluminium, anodized Case size Signal description sensor connectors PIN Input for external triggered Teach-In in mode „Ext. Teach“ Input for updating the sensor outputs in mode „Extern getrig.“ Input for trigger controlled color sequence in mode „Getrig. Sequ.“ Power supply Device shield (earth) Electrical specification sensor connector PIN Push-Pull LOW: 0 V; High: +UB-1 V; max. 100 mA Push-Pull Important...