DATASHEET CR-COMBox Angewandte Sensortechnik CR-COMBox Manage color sensors from the PC he CR-COMBox supplements the product program of the CROMLAVIEW® color sensor family and can be combined with the sensors CR100, CR200 and CR210. The CR-COMBox is a multiport repeater / hub based on RS232, and its robust make is intended for industrial use. When connecting, each CROMLAVIEW® color sensor can be addressed separately. The address space facilitates the connection of up to 255 color sensors, which can thus be operated from one COM port. 7 color sensors can be connected to one CR-COMBox. When cascading the CR-COMBoxes, the UPLINK connector is linked with the PC connector of the next CRCOMBox instead of a sensor. The CR-COMBox is powered by the connected sensors, which have especially been equipped for operation at a CR-COMBox. An external power supply is not necessary. The reduced cabling effort for large distances between central control and sensors is a further advantage, as there is only one RS232 cable that needs to be installed from the control to the operating site. Key Features 7 sensors can be connected to one CR-COMBox Cascading allows the connection of up to 255 sensors No external power supply (is done by the connected sensors) Reduced cabling efforts ASTECH Angewandte Sensortechnik GmbH

DATASHEET CR-COMBox Angewandte Sensortechnik Technical Data Interfaces 8 LEDs for state if readiness Protection standard Power supply Case temperature during operation Case material Aluminium, anodized Case size Supply voltage input (Connector PC: Supply voltage output) Shield Device shield (earth Sensor connected ASTECH Angewandte Sensortechnik GmbH