Model: SRX-CA120-4
1Pages

Catalog excerpts

APPLIED SENSING TECHNOLOGIES % Oxygen Sensor Model: SRX-CA120-4 SRX-CA120-4 Oxygen Sensor is a galvanic type micro fuel cell speciﬁc to oxygen. Its innovative design with unique anode structure provides with excellent signal stability at elevated oxygen values. This sensor is an excellent choice for measuring high levels of oxygen. Sensor is designed, developed and manufactured in the USA. Lorem ipsum SRX-CA120-4 Replaces: Analytical Industries In., Model GPR-11-120-4 Speciﬁcations* Sensor Technology Measuring Range Signal Output¹ Response Time T90 Accuracy ² Drift ² Linearity Repeatability Temperature Coefﬁcient Operating Temperature Storage Temperature Recommended Flow Rate Humidity Non-Condensing Expected Life³ Recommended Storage Warranty4 PCB Connections Galvanic Type Micro Fuel Cell 0 to 100 Percent Oxygen 16-25 uA 13 seconds +/- 1% of signal < 0.2% +/- 1% +/- 0.5% 2.0% / °C 0 to 50°C 5to 35°C 0.5 - 5 SCFH 0 - 99% RH 24 months 6 months 12 months MAC-4MR-4 Connector Note: Do not expose sensor to temperatures above 50oC for extended period of time. Failure to do so may have negative impact on its performance and life. 1. Signal Output measured in air at 25°C at atmospheric pressure. 2. At constant temperature and pressure after calibration with 100% oxygen.. 3. At ambient temperature and pressure, and oxygen content upto 100%. 4. AST warrants the sensor for 12 months to be free from defects in materials and workmanship. AST will not be held liable for sensor damaged due to customer neglect. * Speciﬁcations are validated during design and are subject to change without notice.

Open the catalog to page 1

Model: SRX-CA120-4 1Pages

Catalog excerpts

All AST - Applied Sensing Technologies catalogs and technical brochures

Model: SRX-CA120-4
1Pages