APPLIED SENSING TECHNOLOGIES Advanced Sensor Technology Proprietary Electrolyte Formulation and Anode Meterial Electro-etched Smooth Cathode Recovery From Air to 10 PPM in under 40 Minutes Extended Operating Temperature Range -10°C (-4°F) Z-Series sensor Compatibility with 0-100% CO2 Fast Sensor Response, no Routine Sensor Maintenance Needed Key Transmitter Features User Selectable Range From 0-5 PPM to 25% Output Locking on Selected Range 4-20 mA or 1-5 VDC Fine Tuned Temperature Compensation Barometric Pressure Compensation Intrinsically Safe Design, complies with Class I Div I Group IIC 18-24 VDC Loop Powered For Intrinsic Safety Compliance, use MTL7706+ Barrier Analyzer Technical Specifications * • Measurement Range: User selectable from 0-5 PPM - 21% • Display: Bright 2-Line LED • Output Lock: 4-20 mA locked on user selectable range. • Accuracy: < 2% of FS at constant operating conditions • Linearity: +/-1% after calibration • Temperature Compensation: Fine tune on low PPM range for enhanced stability • Barometric Pressure Compensation: Optional • Calibration Method: Certified Span Gas or air, Recommended Calibration interval 30 days • Gas Connections: 1/8" compression tube fittings or 1/8” female NPT • Menu Controls: Membrane Switch, Menu driven selection of Analysis Range, Display Resolution, Signal Filter Strength, Fine Tune Temp Compensation, System Functions • Response Time: 90% of Step Change in <30 sec • Repeatability: +/-1% over all ranges • Recommended Sample Flow Rate: 1-2 SCFH, vent to atmosphere • Sample System Included: SS 316 Sensor Housing with Compressing Tube Fittings Gas Connectors • Sensor Model: AST-333 inert gases, AST-333Z for gases containing more than 0.5% CO2 • Expected Sensor Life: 24 months @ 25ºC and 1 atm • Operating Temp: Range: 5ºC to 45ºC • Enclosure: IP67 Painted Aluminum 7.3” x 5.3” x 3.4” • Warranty: 12 months trnasmitter; 12 months sensor Optional Accessories/Equipment AST-100 sensor for analysis above 100 PPM KF-40 Flange *Specification validated during desing, subject to change without notice ISO 9001:2015 Quality System (909) 517 003 7 info@app liedsensing.com www.appliedsensing.