A Complete Electrical Safety Testing System that Satisfies the Most Demanding Medical Compliance Requirements AVAILABLE INTERFACES Our MedTEST system can be designed to provide a complete test solution for medical device manufacturers in need of conforming to IEC 60601-1 3rd Edition Standard. Customize your MedTEST system to satisfy your individual testing requirements including Hipot, Ground Bond, Insulation Resistance, Functional Run and leakage current testing for all B, BF and CF type applied parts including Mains on Applied Parts (MOAP) tests. Up to 40 A of continuous DUT current combined with our Active Link® technology reduces overall test time and integration with our SC6540 modular multiplexer allows for multi-point sequential testing without the need to change test leads. Get the most from your test system by utilizing our WithStand® software for maximum productivity-enhancing benefits. Ground Bond Ground Continuity SAFETY & PRODUCTIVITY FEATURES Remote Safety Remote Safety Interlock Interlock Easily disable HV output Prompt & Hold Prompt & Provides alerts Hold & instructions between tests Multiple Multiple Languages Languages Active Link® Active Link Continuous power during test steps My Menu My Menu Customize your own shortcut menu DualCHEK® Dual Check Simultaneous Hipot and Ground Bond Internal Internal Multiplexer Multiplexer Available with optional HV multiplexer Modular Modular Multiplexer Multiplexer Compatible Automatic operator shock protection Multi-Language user interface FailCHEK™ FailCHEK Confirms failure detection Insulation Resistance Leakage Current Power Source Recommended Cal-Alert Cal-Alert® Tracks and alerts for calibration Ramp-HI Ramp-HI® Reduce ramp time during DC Hipot WithStand® WithStand Automation Compatible Charge-LO Charge-LO® Confirms proper DUT connection Accredited calibration options available

POPULAR MEDTEST CONFIGURATIONS OMNIA® II 8207 AND SC6540 • ll-in-one testing system (Hipot, Ground Bond, Insulation A Resistance, and Leakage Current) • Built in 500 VA AC power source • Efficient use of rack space • C6540 provides automated multi-point testing S Most common applications incorporate 8 or 16 port multiplexers • ll-in-one testing system (Hipot, Ground Bond, Insulation Resistance, and A Leakage Current) • ompatible EEC power source provides power to DUT * C • C6540 provides automated multi-point testing. S Most common applications incorporate 8 or 16 port multiplexers *Choose from...

MedTEST LINE CONDITIONS DIELECTRIC WITHSTAND TEST MODE Reverse Power Switch Switch for power polarity reversal Output Rating* Neutral Switch Neutral switch on/off selection for single fault Voltage Setting Ground Switch Ground switch on/off selection for class I single fault Range: Resolution: Accuracy: PROBE SETTINGS Surface to Surface LEAKAGE LIMIT SETTINGS Touch Current High/Low Limit (rms) Range: Resolution: Touch Current High/Low Limit (Peak) Range: Resolution: MEASURING DEVICE MODULE 0.000-9.999 mA 0.001 mA ± (2% of setting + 2 counts) 10.00 – 50.00 mA 0.01 mA ± (2% of Setting + 2 counts)...

MedTEST CONTINUITY TEST MODE Output Current Resistance Display HI and LO-Limit GENERAL SPECIFICATIONS Dwell Timer Built-in SmartGFI® circuit 620L: 50 memories, 30 steps per memory OMNIA® II: 10,000 steps Safety Memory Milliohm Offset Output Frequency Output Current 50/60 Hz ± 0.1%, User Selection Range: Resolution: Accuracy: AC POWER SOURCE AC Power Source GROUND BOND TEST MODE Output Voltage Standard: USB, RS-232 Optional: Ethernet, GPIB Output Regulation ± (1% of output + 0.02 A) Within maximum load limits, and over input voltage range Maximum Loading Up-to 4 kVA compatible power sources available...