The Fully Automated Leakage Current Instrument that Changed the Industry Our LINECHEK® II model 620L provides 7 measuring devices (MD’s) compliant with international certification bodies as well as a convenient switching network to simulate all 8 required fault conditions, everything you need for full Leakage Current compliance. Utilize the intuitive user interface or control via a PC for more advanced automated applications that require data storage and analysis. The 620L handles up to 40 A of continuous current and can be interfaced to an SC6540 modular multiplexer for multi-point testing. Interconnect the 620L to an OMNIA® II instrument to form a complete electrical safety compliance testing system. AVAILABLE INTERFACES Ethernet (Optional) SAFETY & PRODUCTIVITY FEATURES Prompt & Hold Prompt & Provides alerts Hold & instructions between tests Remote Safety Remote Safety Interlock Interlock Active Link® Active Link Continuous power during test steps Modular Modular Multiplexer Multiplexer Compatible Interconnection Interconnect Interconnect with OMNIA® II or HypotULTRA® to form a complete test system Basic PLC relay control Cal-Alert Cal-Alert® Tracks and alerts for calibration ® Easily disable HV output WithStand® WithStand Automation Compatible Software Find the Model that Fits Your Testing Needs Leakage Current Power Source Recommended

LINECHEK® II INPUT SPECIFICATIONS AC Voltage High/Low Limit Range: Resolution: Range: Resolution: Accuracy: 0.0 – 277.0 V 0.1 V/step ± (1.5% of reading + 2 counts), 30.0 – 277.0 V Delay Time Setting Range: Resolution: Dwell Time Setting Range: Resolution: Accuracy: Failure Protection On Start-Up – Neutral Voltage Check (Neutral – V) Over current and ground current check (Line – OC) LINE CONDITIONS Reverse Power Switch Switch for power polarity reversal Neutral Switch Neutral switch on/off selection for single fault Ground Switch Ground switch on/off selection for class I single fault PROBE SETTINGS...