High Tech Clim (-40 / + 90 )

Product catalog summary

Overview: The document outlines the specifications and features of ASP's high-tech insulating covers designed to operate in extreme temperatures ranging from -40°C to +90°C. These solutions are engineered to minimize thermal conductivity while ensuring maximum efficiency and minimal restriction to robotic movement.

Specifications:

Multiple-layer insulating cover with reinforced seal to impede heat transfer.
Rotating rings for axis 1 and axis 4 with built-in airflow.
Specific air handling system with integrated dehydrator.
Waterproof and repairable covers.

Materials:

TKS-ALU and TP62 materials are used, featuring aramid and polyester textures coated with silicone and rubber respectively.
Both materials are RoHS 2 and REACH compliant.

Performance Metrics:

Weight: 550 g/m² ± 20 for TKS-ALU.
Tear strength: Warp and weft > 10 daN.
Crumpling resistance: Warp and weft > 2,000 cycles.
Breaking strength: Warp > 96 daN/5cm, Weft > 50 daN/5cm.
Flammability: Classified as M1.

Additional Features:

Single-use ATEX painting.
Flexible and silicon-free coating.
Porosity: 25 L/M²/24 H under 127 PA.

Contact Information: ASP is located at 840, chemin des Montants - BP 13, FR - 54690 EULMONT. For inquiries, contact via phone at +33 (0)3 83 22 88 55 or email at [email protected].

Catalog excerpts

HIGH-TECH SOLUTION CLIM - 40°C / + 90° C solution TKS-ALU I TP62 Multiple-layer insulating cover to impede heat transfer Cover with reinforced seal Rotating rings for axis 1 and axis 4 with built-in air ﬂow Speciﬁc air handling system with integrated dehydrator 35 www.asp-protection.

Open the catalog to page 1

HIGH-TECH SOLUTION I CLIM - 40°C / + 90° C solution ASP’s « CLIM -40°C / +90°C » solutions are made from speciﬁc materials (fabric, and accessories). They are developed and produced in constant pursuit of the lowest possible thermal conductivity. The « Custom » Design offers maximum efﬁciency while complying with your constraints and requirements with minimum restriction to robot movement. The dry-air ventilation/ pressurisation system guarantees highly efﬁcient protection. Covers repaired in our workshops provide resilient and long-lasting protection for your robots. TKS-ALU Aramid texture Coated...

Open the catalog to page 2

All ASP catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list