AERONAUTICS Shot blasting

Product catalog summary

Introduction
This document outlines the specifications and features of ASP's shot blasting and sand blasting covers, specifically designed for the aeronautics sector. These covers are assembled by cold vulcanization and are silicon-free, ensuring high resistance and durability during surface treatment operations.

Specifications

Material and Design: The covers are made from technical materials that are washable and repairable, with specific cover shapes that do not limit robot movements.
Physical Properties: The covers have a surface mass of 100 g/m² ± 65, thickness of 1 mm ± 0.05, and tensile strength of ≥ 35 MPa in both warp and weft directions.
Elongation and Modulus: Elongation at break is ≥ 450% for both warp and weft, with a modulus at 100% elongation of ≥ 3 MPa.
Temperature and Hardness: They can withstand low temperatures below -50°C and have a hardness of 85 Sh A ± 5.
Compliance: The covers comply with various regulations, including FDA certification, RoHS 2, and REACH.

Performance and Features

Waterproof and Durable: The covers are waterproof with welded seams and are designed to be durable and long-lasting.
Technical Composition: Made from technical white rubber TPE with a thickness of 1 mm, and polyamide texture coated on both sides with thermoplastic.
Strength and Adhesion: Tensile strength is > 300 daN/5cm, tear strength is > 100 daN, and peeling test adhesion is > 15 daN/5cm.

Conclusion
ASP is committed to enhancing the quality of its products and reserves the right to modify designs and characteristics without prior notice. The covers are designed to meet the specific needs of the aeronautics industry, providing reliable and efficient solutions for surface treatment operations.

Catalog excerpts

Shot blasting / Sand blasting T1A I TORCAL B+ Speciﬁcally designed for shot blasting Assembled by cold vulcanization Speciﬁc, specially adapted cover shapes Covers that can be repaired and pressurised Guaranteed silicon free

Open the catalog to page 1

AERONAUTICS I Shot blasting / Sand blasting Washable ASP covers are made from speciﬁc technical materials. This ensures excellent resistance during surface treatment operations and enables the covers to last several years. While meeting your constraints, the « tailor-made » designs ensure maximum efﬁciency without limiting robot movements. Whether the robots are fully integrated in the booth or work trough a window, ASP can provide original solutions that are tried and tested. T1A Technical white rubber TPE REACH compatible Guaranteed silicon free Waterproof with welded seams Tensile Strength...

Open the catalog to page 2

All ASP catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list