GE F45 ST

Product catalog summary

General Data:
The Safety-Contact-Edge GE F45 ST is identified by Article No. 1502 0460 and is made from TPE material with a hardness of 65 Shore A. It is supplied in lengths of 25 meters and weighs 0.6 kg/m. The enclosure rating is IP 65, and it can withstand mechanical forces up to 500 N. The product is designed for 10,000 switching cycles and has a switching angle of 2 x 45°. The actuation resistance is ≤ 500 Ohm, and it operates at 24 V and 100mA. The operating temperature ranges from -10°C to 55°C, with a maximum temperature range of -25°C to 75°C. The maximum length for several contact edges is 100 meters, and up to 5 contact edges can be connected in series.

Performance Characteristics:
The contact edge's performance is tested at a temperature of +20°C. The actuating force and overtravel distances are measured at different test speeds (10mm/s, 100mm/s, 200mm/s) and forces (250N, 400N, 600N). The results indicate varying actuating distances and overtravel distances, which are critical for ensuring safety and performance.

Material Properties:
The material properties are guidelines, and critical applications should be tested by the customer. The material exhibits medium tear strength, ultimate tensile strength, and rebound elasticity at 20°C. It has good resistance against permanent deformation and abrasion, with excellent cold flexibility and oxidation stability. However, it has poor flame resistance and moderate gas permeability. Chemical resistance varies, with excellent resistance to water, diluted acids, and bases, but poor resistance to ASTM-oil No.3 and hydrocarbons.

Testing Standards:
The product is tested according to EN 1760-2 standards, using a round 80mm test unit at an actuating point C3 and a temperature of 20°C.

Catalog excerpts

Technische Daten Sicherheitskontaktleiste GE F45 ST Technical data Safety-Contact-Edge GE F45 ST Allgemeine Daten General Data Material Hardness Delivery Length Mech. Belastung Mech. Force Switching Cycles Switching Angle Actuation Resistance Elek. Belastbarkeit Characteristic values for test-temperature +20°C Operating Temperature Max. Temperaturbereich Max. Länge mehrerer Kontaktleisten Max. Reihenschaltung der Kontaktleiste Inaktiver Bereich mit höheren Kräften Leitungen (max. 25m) Max. Temperature Range Max. Length of several Contact Edges Max. Series Connection of the Contact Edges Inactive end region with higher forces Connecting cables Material Leitung Electrical Capacity Cable material Maße in mm, Toleranzen nach DIN ISO 3302-1 Klasse E2 Dimension in mm, Tolerances according to DIN ISO 3302-1 class E2 Betätigungskraft FA Actuating Force FA Ansprechweg c Actuating Distance c Nachlaufweg d bis 250N Overtravel Dist. d to 250N Nachlaufweg f bis 400N Overtravel Dist. f to 400N Nachlaufweg h-c bis 600N Overtravel Dist. h-c to 600N Betätigungskraft FA Actuating Force FA Ansprechweg c Actuating Distance c Nachlaufweg d bis 250N Overtravel Dist. d to 250N Nachlaufweg f bis 400N Overtravel Dist. f to 400N Nachlaufweg h-c bis 600N Overtravel Dist. h-c to 600N Betätigungskraft FA Actuating Force FA Ansprechweg c Actuating Distance c Nachlaufweg d bis 250N Overtravel Dist. d to 250N Nachlaufweg f bis 400N Overtravel Dist. f to 400N Nachlaufweg h-c bis 600N Overtravel Dist. h-c to 600N Prüfung nach EN 1760-2, Prüfkörper rund 80mm, Betätigungspunkt C3, Temp. 20°C Tested according EN 1760-2, Test Unit round 80mm, Actuating Point C3, Temp. 20°C Die Reaktionszeit der angeschlossenen Auswertelektronik beeinfußen die ermittelten Nachlaufwege der Kontaktleiste. The response time of the used controller affected the measured overtraveled distances of the edge.

Open the catalog to page 1

Technische Daten Sicherheitskontaktleiste GE F45 ST Technical data Safety-Contact-Edge GE F45 ST Materialeigenschaften Material Properties Am Grarock 8 • D-33154 Salzkotten www.asosafety.com • e-mail: [email protected] 15.DB.09.150 Technische Daten Rev 00 Stand 31.10.2012 Technische Änderungen vorbehalten 15.DB.09.150 Technical data rev 00 as of October 31th 2012 Technical changes reserved Reißfestigkeit Reißdehnung Rückprallelastizität bei 20°C Widerstand gegen bleibende Verformung Abrieb Weiterreißwiderstand Kälteflexibilität Wärmebeständigkeit Oxidationsbeständigkeit UV-Beständigkeit Wetter-/...

Open the catalog to page 2

GE F45 ST

GE F45 ST

Catalog excerpts

All ASO GmbH catalogs and technical brochures