GE F115 SK
GE F115 SK
The Safety-Contact-Edge GE F115 SK is influenced by the response time of the connected controller, affecting the measured overtravel distances. The product is made of EPDM material with a hardness of 68 Shore A and is delivered in lengths of 15 meters. It has a weight of 1.9 Kg/m and an IP 65 enclosure rating. The mechanical force it can withstand is 500 N, with a switching cycle of 105 and a switching angle of 2 x 45°. The actuation resistance is ≤ 100 Ohm, and it has an electrical capacity of 24 V, 100 mA. The operating temperature ranges from -10°C to 55°C, with a maximum temperature range of -25°C to 75°C. The maximum length of the contact edge, including cables, is 100 meters, and up to 10 contact edges can be connected in series. The inactive end region is 20 mm, and the connecting cables are LIY11Y 2x0.34 mm with PUR matte black material.
Tests were conducted according to EN 1760-2 at a speed of 10 mm/s and 100 mm/s, with a test unit of 80 mm round and actuating point C3. The tests were performed at temperatures of +20°C, +60°C, and -20°C. The actuating force, actuating distance, and overtravel distances were measured under different loads (250N, 400N, 600N) at these temperatures.
The material properties include tear strength, ultimate tensile strength, rebound elasticity, resistance against permanent deformation, abrasion, elongation at tear, cold flexibility, heat stability, oxidation stability, UV stability, weather/ozone resistance, flame resistance, and gas permeability. Chemical resistance is rated against various substances such as water, acids, bases, oils, solvents, hydrocarbons, and alcohols, with ratings from 1 (very good) to 6 (insufficient).
Force curves are provided for different test conditions, showing the relationship between force and distance, with switching points and overtravel distances marked for different loads.
Catalog excerpts
Technische Daten Sicherheitskontaktleiste GE F115 SK Technical data Safety-Contact-Edge GE F115 SK Allgemeine Daten Kennwerte für Prüfgeschwindigkeit: V = 10 mm/s Characteristic values for test speed: V = 10 mm/s Prüf-Temperatur +20° C Test-Temperature +20° C GE F115 SK Prüfung nach EN 1760-2, Prüfgescwindigkeit 10 mm/s, Prüfkörper rund 80 mm, Betätigungspunkt C3,Temp. 20°C Tested according EN 1760-2, Speed 10 mm/s, Test Unit round 80 mm, Actuating Point C3, Temp. 20°C 600 Kraf- Kurve / Force-Curve Schaltpunkt / Switching-point Betätigungskraft FA Actuating Force FA Ansprechweg SB Actuating Distance SB Nachlaufweg SV bis 250N Overtravel Dist. SV to 250N Nachlaufweg SV bis 400N Overtravel Dist. SV to 400N Nachlaufweg SV bis 600N Overtravel Dist. SV to 600N General Data Typ GE F115 SK Type Artikel-Nummer 101284 Article No. Material EPDM Material Materialhärte 68 Shore A Material Hardness Lieferlänge 15 m Delivery Length Gewicht Kg/m 1,9 Weight Kg/m Schutzart IP 65 Enclosure Mech. Belastung 500 N Mech. Force Schaltspiele 105 Switching Cycles Schaltwinkel 2 x 45° Switching Angle Betätigungswiderstand ≤ 100 Ohm Actuation Resistance Elek. Belastbarkeit 24 V 100 mA Electrical Capacity Betriebstemperatur -10° → 55° C C Operating Temperature Max. Temperaturbereich -25° → 75° C C Max. Temperature Range Max. Länge der KontaktMax. Length of the 100 m leiste incl. Leitung Contact Edge inc. Cables Max. Reihenschaltung 10 KontaktMax. Series Connection of the Contact Edges der Kontaktleisten leisten Inaktiver Bereich 20 mm Inactive end region Leitungen LIY11Y 2x0,34 mm Connecting cables Material Leitung PUR matt schwarz Cable material Maße in mm, Toleranzen nach DIN ISO 3302-1 Klasse E2 Dimension in mm, Tolerances according to DIN ISO 3302-1 class E2 600 Kraf- Kurve / Force-Curve Schaltpunkt / Switching-point Betätigungskraft FA Actuating Force FA Ansprechweg SB Actuating Distance SB Nachlaufweg SV bis 250N Overtravel Dist. SV to 250N Nachlaufweg SV bis 400N Overtravel Dist. SV to 400N Nachlaufweg SV bis 600N Overtravel Dist. SV to 600N GE F115 SK Prüfung nach EN 1760-2, Prüfgescwindigkeit 10 mm/s, Prüfkörper rund 80 mm, Betätigungspunkt C3,Temp. 60°C Tested according EN 1760-2, Speed 10 mm/s, Test Unit round 80 mm, Actuating Point C3, Temp. 60°C 600 Kraf- Kurve / Force-Curve Schaltpunkt / Switching-point Betätigungskraft FA Actuating Force FA Ansprechweg SB Actuating Distance SB Nachlaufweg SV bis 250N Overtravel Dist. SV to 250N Nachlaufweg SV bis 400N Overtravel Dist. SV to 400N Nachlaufweg SV bis 600N Overtravel Dist. SV to 600N GE F115 SK Prüfung nach EN 1760-2, Prüfgescwindigkeit 10 mm/s, Prüfkörper rund 80 mm, Betätigungspunkt C3,Temp. -20°C Tested according EN 1760-2, Speed 10 mm/s, Test Unit round 80 mm, Actuating Point C3, Temp. -20° C Die Reaktionszeit der angeschlossenen Auswertelektronik beeinflusst die ermittelten Nachlaufwege der Kontaktleiste. The response time of the used controller affected the measured overtraveled distances of the edge.
Open the catalog to page 1
Technische Daten Sicherheitskontaktleiste GE F115 SK Technical data Safety-Contact-Edge GE F115 SK Prüf-Temperatur +20° C Test-Temperature +20° C Betätigungskraft FA Actuating Force FA Ansprechweg SB Actuating Distance SB Nachlaufweg SV bis 250N Overtravel Dist. SV to 250N Nachlaufweg SV bis 400N Overtravel Dist. SV to 400N Nachlaufweg SV bis 600N Overtravel Dist. SV to 600N GE F115 SK Prüfung nach EN 1760-2, Prüfgescwindigkeit 100 mm/s, Prüfkörper rund 80 mm, Betätigungspunkt C3,Temp. 20° C Tested according EN 1760-2, Speed 100 mm/s, Test Unit round 80 mm, Actuating Point C3, Temp. 20°C 600...
Open the catalog to page 2All ASO GmbH catalogs and technical brochures
GE F65 ST2 Pages
GE F50 FKLi2 Pages
GE F45 ST2 Pages
Safety Contact Mat ASK7 Pages
Safety Bumper ASB6 Pages
Product calalog36 Pages
INDUS Compact84 Pages
Safety contact edges7 Pages
