posiwire® Cable Extension Position Sensors WS58C Displacement sensor with measurement length up to 2,500 mm Aluminum housing With optical encoder Product versions

WS58C - Cable Extension Position Sensor Version with absolute encoder output Specifications Order options Measurement range Output for 12 bit per revolution (4096 steps / revolution) Absolute encoder with synchronous serial output (SSI) Absolute encoder with Profibus interface Absolute encoder with Interbus interface Absolute encoder with DeviceNet interface Absolute encoder with CAN-interface Absolute encoder with CANopen interface HSSI HPROF HINT HDEV HCAN HCANOP Sensing device Absolute encoder Aluminum measuring cable: stainless steel Protection class IP50 (IP64 optional), depending on encoder...

posiwire® WS58C Dimensions Measurement range 2500 mm, absolute encoder output HSSI Dimensions in mm [inch] Dimensions informative only. For guaranteed dimensions consult factory.

posiwire® WS58C Measurement range 2500 mm, absolute encoder output HPROF / HINT / HDEV / HCAN / HCANOP Dimensions in mm [inch] Dimensions informative only. For guaranteed dimensions consult factory.

posiwire® WS58C Output specifications Absolute encoder output HSSI Excitation voltage synchronous serial Excitation current Lines / drivers Control input Zero adjustment with optical response Alarm output Alarm bit (SSI option), warning bit Data format (Mx = Multiturn bits, Sx = Singleturn bits) Transmission rate Cable length Baud rate Extension of the cable length will reduce the maximum transmission rate. Cable color View to the sensor connector * unconnected or Excitation + = cw increasing code 0 V = cw decreasing code

Excitation voltage Excitation current Profibus DP with encoder profile C2 Output code Baud rate Automatically selected between 9,6 kBaud and 12 MBaud Resolution, preset, direction Integrated special functions Velocity, acceleration, operating time Bus cover with T manifold Output signals Cable terminal no. (bus cover) Signal wiring

CAN highspeed according to ISO/DIS 11898 CAN specification 2.0 A (11 bit identifier) Excitation voltage Excitation current DeviceNet according rev. 2.0, programmable encoder Output code Date refresh Baud rate Selectable via DIP switch: 125 kBaud, 250 kBaud, 500 kBaud Resolution, preset, direction Bus cover with T manifold Recommended transmission Characteristic impedance Operating capacity Loop resistance Wire diameter Wire width Transmission rate Segment length Signal wiring Output signals Cable terminal no. (bus cover)

HCAN / HCANOP CAN highspeed according to ISO/DIS 11898 Excitation voltage Excitation current CANopen according DS301 with encoder profile DSP406, programmable encoder according class C2 Output code Data refresh Every millisecond (selectable), on request Baud rate Base identifier CANopen: direction, resolution, preset, offset CAN L2: direction, limit values Integrated special functions CANopen: velocity, acceleration, rotary axis, limit values CAN L2: direction, limit values Bus cover with T manifold Output signals Cable terminal no. (bus cover) Signal wiring

posiwire® WS58C Accessories Plug-in connector CONIN, 12 pin (straight coupling) Order code: