Catalogs >
ASM Automation Sensorik Messtechnik GmbH >
PRAS1

PRAS1
1 / 12Pages

Catalog excerpts

posirot® Magnetic Angle Sensors PRAS1 Angle sensor for standard industrial applications Stainless steel round housing Contactless with external position magnet, wear-free

Open the catalog to page 1

PRAS1 - Magnetic Angle Sensor Version with analog output Specifications Order options Measurement range Voltage 0.5 ... 10 V Voltage 0.5 ... 4.5 V ratiometric Voltage 0.5 ... 4.5 V Current 4 ... 20 mA, 3 wire Signal characteristics Signal increasing CW, clockwise Signal increasing CCW, counterclockwise Rated distance sensor / magnet Depending on the position magnet Housing material Stainless steel Protection class 5-pin connector M12 (compatible to 4-pin connector) Temperature range Accessories: Connector cable (see page 12) Position magnets (see from page 4)

Open the catalog to page 2

A – Position magnet B – Measuring area C – Marking D – Connector M12 Dimensions in mm [inch]. Weight approx. 35 g. Dimensions informative only. For guaranteed dimensions consult factory.

Open the catalog to page 3

Order code zinc coated steel, plastic A misalignment of the position magnet has an effect on the linearity. Dimensions in mm [inch]. Dimensions informative only. For guaranteed dimensions please consult factory.

Open the catalog to page 4

Order code zinc coated steel; plastic A misalignment of the position magnet has an effect on the linearity. Dimensions in mm [inch] Dimensions informative only. For guaranteed dimensions please consult factory.

Open the catalog to page 5

Order code zinc coated steel, plastic A misalignment of the position magnet has an effect on the linearity. Dimensions in mm [inch]. Dimensions informative only For guaranteed dimensions please consult factory.

Open the catalog to page 6

A – Sensor B – Marking C – Thread M10 Order code A misalignment of the position magnet has an effect on the linearity. Dimensions in mm [inch]. Dimensions informative only. For guaranteed dimensions please consult factory.

Open the catalog to page 7

Measuring error by misalignment of the position magnet Air gap (a) Parallelism (b) Axial misalignment (c) Error by axial misalignment [°] Position magnet

Open the catalog to page 8

Output specification Analog output U2 Voltage output 0.5 ... 10 V Excitation current Output voltage Output current Measuring rate Stability (temperature) Reverse polarity, short circuit Operating temperature Excitation voltage Excitation current Output voltage Output current Measuring rate Stability (temperature) Reverse polarity, short circuit Operating temperature U6 Voltage output 10 … 90 % ratiometric Excitation voltage

Open the catalog to page 9

Excitation current Output voltage Output current Measuring rate Stability (temperature) Reverse polarity, short circuit Operating temperature Excitation voltage Excitation current Output current Measuring rate Stability (temperature) Reverse polarity, short circuit Operating temperature I1 Current output 4 … 20 mA, 3 wires Excitation voltage Analog output, 1 channel (connector and cable output) Signal wiring Connector M12, 5 pin Cable color Do not connect! View to the sensor connector Output signals 3-wire current 4...20 mA interface: GND has to be connected!

Open the catalog to page 10

Characteristics for magnetic angle sensors Output signal CW (clockwise increasing) Output signal CCW (counterclockwise increasing) Example angular range 90° Example angular range 360° A – Marking B – Measurement range [°]

Open the catalog to page 11

Accessories Connector cable M12, 4 pin (angular coupling) shielded connector The 4-core screened cable is supplied with a mating 4-pin 90° M12 connector at one end and 4 wires at the other end. Available lengths are 2 m, 5 m and 10 m. Wire: cross sectional area 0.34 mm2 Cable diameter: 5.6 ±0.2 mm Suitable for 5-pin sensor connectors Order code KAB - xM - M12/4F/W - LITZE IP69: KAB - xM - M12/4F/W/69K - LITZE xM = length in m Connector cable M12, 4 pin (straight coupling) The 4-core screened cable is supplied with a mating 4-pin M12 connector at one end and 4 wires at the other end....

Open the catalog to page 12