C ASHCROFT' Trust the shield.™ APPLICATIONS Because of its small 17mm diameter and rugged 316L SS construction, the Ashcroft SL17 submersible pressure transmitter is ideal for level applications, particularly in situations where size or chemical compatibilities are an issue. The SL17 utilizes piezo-resistive technology (PRT) that is known for its proven reliability and stability. Notably, these transmitters can offer all ranges equivalent from 1.5 psig through 300 psig while all units of measure and cable lengths are customer-defined for individualized specifications. FEATURES • Complete 316L SS Construction • IP68 / NEMA 6P Housing • Excellent Long-Term Stability • 4-20 mA Output (2-wire) • Unit of Measure Selection (Psig, Feet or Meters of H20) • Optional NIST Traceable Calibration Chart (9-point) TYPICAL APPLICATIONS • Level (Groundwater / Bore) • Wastewater • Tank Level Measurement PERFORMANCE SPECIFICATIONS Reference Condition: 21°C (70°F) Humidity: 0-100%RH* Accuracy: ±0.25% of span, terminal point (>5 psi); ±0.5% of span, terminal point (<5 psi); Includes effects of linearity, hysteresis and repeatability Stability: ±0.25% FS/year Engineering Units: psi, bar, ftH20, mH20 and customer defined Ranges: 1.5-300 psi & equivalent (see table); gauge pressure only *Based on cable vented to clean, dry, non-corrosive atmosphere or proper use of termination desiccant box ENVIRONMENTAL SPECIFICATIONS Temperature Limits* Compensated: -10/40°C (14/104°F) Operating: -10/40°C (14/104°F) Storage: -20/60°C (14/140°F) Temperature Effects (-10 to 40°C): ±1% TEB (>5 psi) ±1.5% span, terminal point (<5 psi) * For non-frozen liquid applications only FUNCTIONALAL SPECIFICATIONS* Maximum Turndown: 2:1 from original sensor pressure range Vibration & Shock: IEC 60068-2-6 * Based on sensor range ELECTRICAL SPECIFICATIONS Output Signal: 4-20mA (2 wire) Supply Voltage: 10-36Vdc Insulation Resistance: 50Vdc (100Mohm) Withstand Voltage: 350Vdc CE Compliance: • EMI Class A/EMS Table 2 EN61326-1:2006 • Annex BB (Pressure Transducer) EN61326-2-3:2007 • ESD EN61000-4-2 • Burst EN61000-4-4 • Surge EN61000-4-5 MECHANICAL SPECIFICATIONS Pressure Connection: M14 x 1.5 Weight: Sensor (120g) Nose Cones: standard (13g), weighted (225g) Enclosure: 316L SS Labels: Laser-etched with customer part number Cable External Jacket: Coated (.03") black polyurethane Cable Internal Construction: 4-wire 22 AWG conductors (red, black, green, white) Vent tube: 0.060" ID polyethylene Semi-rigid PVC with shield and Kevlar strength member Cable Pull Strength: 180 lb Cable Voltage Rating: 300V Load Limitation: 4-20mA Output Only Wetted Materials: 316L SS and polyurethane All specifications are subject to change without notice. All sales subject to standard terms and conditions. © Ashcroft Inc. 2015 08/15 Ashcroft Inc., 250 East Main Street, Stratford, CT 06614 USA Tel: 203-378-8281 • Fax: 203-385-0408 email: [email protected] • www.ashcroft.com

C ASHCROFT' Trust the shield.™ VENT TUBE 22AWG(per Wire) DIMENSIONS, Inches (Millimeter) NOSE FITTING T Nose Fitting (SNC) Standard NC (P5C) Weighted NC Pressure Range Accuracy Class (3) (5)* *1.5" range only Joint Type (T) Threaded (W) Welded Output Signal Cable Length* (42)4-20mA (001)* Measurement of Cable (F) Feet (M) Meters Cable Type (P) Polyurethane *Available in meters only * Available in feet only * Custom cable lengths available, example for 35 feet, code as (035). All specifications are subject to change without notice. All sales subject to standard terms and conditions. © Ashcroft...