video corpo

ATE-2 Handheld Calibrator - 12 Pages

Add to MyDirectIndustry favorites
ATE-2 Handheld Calibrator

Catalog excerpts

ATE-2 Handheld Calibrator STANDARD BASE UNIT FEATURES • Data logging • IP65 / NEMA 4X enclosure • Onboard 24Vdc loop power supply (non-intrinsically safe version) • Optional intrinsically safe approvals (FM, ATEX, CSA) • SD memory card slot • USB interface • 13 Engineering units of measure The Ashcroft ATE-2 calibrator is designed to measure pressure, temperature, voltage or current. It includes the capability to display up to two modules and one electrical measurement simultaneously, along with logging data to internal memory or communicating directly to a PC via USB connection. The ATE-2 has a wide selection of pressure modules, covering ranges from 0.25 inches H20 through 10,000 psi. The base unit design allows the user to operate one or two modules. Modules are interchangeable, and can be changed without the need of tools, minimizing downtime. The ATE-2 provides a large LCD display for ease of reading measurements and configuring the calibrator. The unique product platform also includes data logging; with internal storage capacity for up to 16,000 records on up to 64 data log files that can be transferred to an SD card. A wide range of standards including CE and RoHS and approvals including UL, FM, ATEX and CSA make the ATE-2 a popular choice worldwide. • Large back lit display • 180 Degree flip display • Programmable damping • Switch test function • Percent error function • Min/max recall • Push-button zero adjust • Tare function • Hot swap capability “larger, brighter display for ease of use” LOOK FOR THESE MARKS ON OUR PRODUCTS All specifications are subject to change without notice. All sales subject to standard terms and conditions. © Ashcroft Inc. 2014 09/14 Ashcroft Inc., 250 East Main Street, Stratford, CT 06614 USA Tel: 203-378-8281 • Fax: 203-385-0408 email: info@ashcroft.com • www.ashcroft .com

 Open the catalog to page 1

ATE-2 Handheld Calibrator ATE-2 STANDARD FUNCTIONS • Data logging allows the user to save pressure, temperature and or electronic values displayed on the LCD to internal memory. Internal memory can hold up to 64 data log files and a total of up to 16,000 individual records. Manual logging is initiated with a single key press. Automatic data logging can be programmed to collect data at timed intervals between 0.1 second and 24 hours. • SD Memory Card Slot gives the ATE-2 additional data storage capability limited only by the capacity of the SD card installed. Data logs stored on the SD card...

 Open the catalog to page 2

Programable Filtering (Damping): Temperature Effect Electrical Measurement: ±0.001% of span per F over compensated range from reference temperature of 70°F (±3°F) Serial Interface: USB (Micro-B connector type) Field Calibration: Base Unit and pressure modules may be field-calibrated via keypad Data Logging: • Internal storage for up to 64 data logs and up to 16,000 records; transferrable to SD card • Manual / automatic data logging capability • Programmable data intervals (0.1 sec. to 24 hrs.) Agency Approvals: OPTIONAL FEATURES Hazardous Location Version (Battery Powered Only): Note: Loop...

 Open the catalog to page 3

ATE-2 Handheld Calibrator OPTIONAL PRESSURE MODULE FEATURES • AM2-1 Low Pressure Module • AM2-2 Medium/High Pressure Module • Hot Swap • Accuracies from 0.025% to 0.1% • Low Pressure Ranges from ±0.25 InH2O to 200 InH2O • Medium/High Pressure Ranges from 5 psi up to 10,000 psi • Gauge, Absolute, Differential, Vacuum and Compound Ranges Quick-Select™ Pressure Modules Available in full-scale ranges from 0.25 inches H20 through 10,000 psi. Gauge, vacuum, absolute, differential or compound pressure ranges are available. Select from multiple modules that can be quickly interchanged...

 Open the catalog to page 4

ATE-2 Handheld Calibrator AM2-2 MEDIUM / HIGH PRESSURE MODULE Pressure Types: Gauge, absolute, compound and vacuum Available Ranges: Refer to Range Table Available Accuracies: ±0.025%, 0.05% or 0.1% of Span (10,000 psi only offered in psig and 0.1% accuracy) Compensated Temperature Range: 20 to 120°F (–7 to 49°C) Temperature Effect: Standard: ±0.004% of Span per °F over compensated range from reference temperature range of 70°F (±3 degrees) Optional: Enhanced Accuracy Option. No additional error due to ambient temperature from +20°F to +120°F Sensitivity: ±0.002% of Span (typical), ±0.001...

 Open the catalog to page 5

Sensor Type Product Code Example: SENSOR TYPE Media Compatability MEDIA COMPATABILITY PRESSURE TYPE COMPOUND PRESSURE RANGES (All prefixed by +/– sign) DIFFERENTIAL PRESSURE RANGES 0.5 PRESSURE UNITS INLET FITTING Pressure Units Pressure Range Inlet Fitting Note: Pressure range codes which contain a decimal Note: “C” accuracy is 0.06% for ranges 1.0 inH2O and higher. point will be designated with a letter “P”. For “C” accuracy is 0.07% for ranges below 1.0 inH2O (shaded values). example 0.5 code is P5 A - NON-ISOLATED SENSOR C - COMPOUND Pressure Type PRODUCT CODE – LOW PRESSURE MODULES

 Open the catalog to page 6

Sensor Type F - .1% ENHANCED. ACCURACY G - .05% ENHANCED. ACCURACY H - .025% ENHANCED. ACCURACY PRESSURE TYPE Pressure Units O - ISOLATED OXYGEN SERVICE MEDIA COMPATABILITY Pressure Type SENSOR TYPE Product Code Example: Pressure Range PRESSURE UNITS Inlet Fitting * = Gauge pressure only (no absolute) -NOTE: 10,000 PSI = 0.1% ACCURACY AND GAUGE PRESSURE ONLY GAUGE / ABSOLUTE PRESSURE RANGES COMPOUND PRESSURE RANGES (NOTE: All symmetric ranges prefixed with +/– sign) PRODUCT CODE – MEDIUM & HIGH PRESSURE MODULES B - 1/8 NPT INTERNAL WITH FLUSH PORT C - G 1/8 BRITISH STD THREAD D - G 1/8...

 Open the catalog to page 7

ATE-2 Handheld Calibrator OPTIONAL TEMPERATURE MODULE FEATURES • Measures temperature with most RTD probes • Supports 2, 3 & 4-wire RTDs • Displays measurement for Fahrenheit, Celsius, Kelvin, Rankine and ohms • Easy configurability to meet application requirements The Ashcroft ATE-2 provides accurate temperature measurement when using the AM2-RT module with an RTD probe. This system supports the most common RTD’s without requiring operator input of probe characterization data; each module comes factory-programmed with standard curves for Pt100 (385 & 392), Ni 120, Cu 10 and temperature...

 Open the catalog to page 8

All ASHCROFT catalogs and technical brochures

  1. 5503

    2 Pages

  2. 1209

    3 Pages

  3. 1290

    2 Pages

  4. 2462

    2 Pages

  5. Type 1133

    2 Pages

  6. 302-303

    4 Pages

  7. T5500E

    2 Pages

  8. IXLDP

    2 Pages

  9. k1

    2 Pages

  10. K2

    2 Pages

  11. K8

    2 Pages

  12. km15

    2 Pages

  13. KS Sanitary

    2 Pages

  14. RXLDP

    2 Pages

  15. SL17-TTS

    1 Pages

  16. 600-01

    2 Pages

  17. 600-02

    2 Pages

  18. 600-03

    2 Pages

  19. 600-04

    2 Pages

  20. 600B

    2 Pages

  21. 600H

    2 Pages

  22. ar10

    4 Pages

  23. ar20

    4 Pages

  24. SWGL

    7 Pages

  25. sw10

    9 Pages

  26. A N4

    4 Pages

  27. A series

    8 Pages

  28. 600A

    2 Pages

  29. DT 600A

    2 Pages

  30. ash A4

    2 Pages

  31. A4

    2 Pages

  32. A2X

    2 Pages

  33. ASH DIG

    3 Pages

  34. DG 25

    3 Pages

  35. 1008S

    2 Pages

  36. 1008 A AL

    2 Pages

  37. 1125

    1 Pages

  38. 1009 1010

    1 Pages

  39. 1010

    2 Pages

  40. test gauges

    3 Pages

  41. 1259

    2 Pages

  42. Ash SW10

    9 Pages

  43. Ash SWA

    8 Pages

  44. Ash DG 25

    3 Pages

  45. Ash DG

    2 Pages

  46. Ash Bul

    3 Pages

  47. Ash EL

    2 Pages

  48. Ash BM

    2 Pages

  49. Ash A2x

    2 Pages

  50. Ash A2 1 3

    2 Pages

Archived catalogs