CI Series Bimetal Thermometers • 1% full span accuracy (ASME B40.3 Grade A) • Maximum ambient temp, is 200°F(94°C) • Hermetically sealed case to prevent entry of moisture, interior corrosion and coil freeze- • Tamper resistant. • Maxivisori" dial allows readability from any angle without parallax error. • Silicone coil dampening (up to 400°F) provides vibration dampening and improves response time. • All-welded stainless steel construction • Heavy-Duty glass lens • Five year limited warranty Dial Sizes: Stem Length: Case & Stem: 304 stainless steel, hermetically Heavy-duty glass, plastic or shatter- proof glass otional Maxivision®, black figures on white Plain, pointed plain, VA NPT, V2IMPT Lower, Rear Code Description C4 Individual calibration cert. XSG Shatter proof glass (1) Special or longer length available, consult factory (2) Dual scale avllable with 3"and 5"case only (3) Only available on rear connection Thermowells must be used on all pressure or velocity applications, to protect the stem of thermometer from corrosion and physical damage, and to facilitate removal of the thermometer without disturbing the process. Maximum ambient temperature is 200°F (95°C). Dial Size: 3" Code 30_I Stem Connection: V2 NPT Code 60 - Stem Location: Rear Code R_ Stem Length: 4" Code 040_ Options: Stainless steel tag _ REGISTERED FIRM BULLETIN BM-CI All specifications are subject to change without notice. All sales subject to standard terms and conditions. Ashcroft Inc., 250 East Main Street, Stratford, CT 06614 USA email: [email protected] • www.ashcroft.com

CI Series Bimetal Thermometers CI Series selection table 1. Figures in parenthesis ( ) are in millimeters. All other dimensions are in inches. 2. Standard "S" dimensions are 2¥¿, 4, 6, 9,12,15,18 and 24 inches. Standard stem diameter is VA il 3. Add 1 oz. for every 2 inches of stem length. CI Series dual scale ranges following ranges: *Dual scale ranges available for all standard °F ranges (3"and 5" case only) ** Sat i sfactory for continuous service up to 800°F or 425°C. Can be used for intermittent service from 800 to 1000°F, or 425 to 500°C. Use Ashcroft Duratemp® thermometers for ranges above...