Data Sheet C ASHCROFT Trust the shield.® Explosion/Flame Proof Pressure Transmitter FEATURES ■ Rugged housing ■ Highly configurable: wide selection of pressure ranges and pressure connections. ■ Output: select voltage or current versions ■ Natural gas compression and transfer control ■ Alternative energy projects PERFORMANCE SPECIFICATIONS Accuracy Class: ±0.25%, ±0.5%, ±1.0% of span Terminal Point Method includes: non-linearity, hysteresis, non-repeatability, zero offset and span setting errors Best Fit Straight ±0.2%, ±0.4%, ±0.5% of span Line (BFSL): Add ± 0.05% for ranges >5,000 psi Durability: >10 million cycles Stability: <±0.25% span/year at reference conditions ENVIRONMENTAL SPECIFICATIONS Effects: ±1.0% of span for ±0.25% accuracy class ±2.0% of span for ±0.5% and ±1.0% accuracy class Humidity Effects: 0-95% R.H. non-condensing (no effects) 0-100% R.H. with welded enclosure (no effects) FUNCTIONAL SPECIFICATIONS Pressure Ranges: Vacuum, gauge, compound and absolute pressure from 0 to 5 psi through 0 to 10,000 psi (Bar ranges available) Random Vibration: 10 g RMS, 20-2,000 Hz Sweep Vibration: 50-2,000 Hz, 5 g peak Position Effect: ±0.02%, typical Overpressure: Proof: Burst: Electrical A NPT Male conduit with flying leads or shielded Termination: cable Note: *30 Vdc Max for Intrinsically Safe installations All specifications are subject to change without notice. All sales subject to standard terms and 1 of 4 conditions. Ashcroft® and Trust the Shield® are trademarks of Ashcroft Inc. The following non-Ashcroft trademarks are the property of their respective owners: 17-4PH®, Aminco®, VCR®, Tri-Clamp®. For more information, see Ashcroft Brands & Trademarks ©2024 Ashcroft Inc

Data Sheet C ASHCROFT Trust the shield.® WETTED MATERIAL PHYSICAL SPECIFICATIONS Environmental IP65, NEMA 7,9 Rating: HAZARDOUS AREA CERTIFICATIONS Diaphragm Process Connection 316L Stainless steel 316L Stainless steel Explosion Proof: Explosion Proof-cUL (USL/CNL): Flame Proof - ATEX: Ex d IIC T4 NOTE: For 4-20 mA units following approvals also Intrinsically Safe - FM/CSA Intrinsic Safety: Class I, II and III Div. 1 and 2 Groups A, B, C, D, F and G per entity requirements see Ashcroft drawing #825A022 Non-incendive: Class I, II and III Div. 2, Groups A, B, C, D, F and G, no barriers needed NON-WETTED...

Data Sheet C ASHCROFT Trust the shield.® Pressure Range (see range table on page 4) Measurement Type A - Absolute pressure (Not available with X6B option) Option (if including an option(s) must include an “X’’) K8 - 17-4PH® Stainless steel sensor material 6B - Cleaned for oxygen service (Not available with absolute ranges) All specifications are subject to change without notice. All sales subject to standard terms and 3 of 4 conditions. Ashcroft® and Trust the Shield® are trademarks of Ashcroft Inc. The following non-Ashcroft trademarks are the property of their respective owners: 17-4PH®, Aminco®,...

Data Sheet C ASHCROFT Trust the shield.® DIMENSIONS in [ ] are millimeters For reference only, consult Ashcroft for specific dimensional drawings Explosion / Flame Proof Enclosure 4.78 All specifications are subject to change without notice. All sales subject to standard terms and 4 of 4 conditions. Ashcroft® and Trust the Shield® are trademarks of Ashcroft Inc. The following non-Ashcroft trademarks are the property of their respective owners: 17-4PH®, Aminco®, VCR®, Tri-Clamp®. For more information, see Ashcroft Brands & Trademarks ©2024 Ashcroft Inc. A2x_transducer_ds_RevG_10-24-24