CASHCROFT Trust the shield.® A2 Pressure Transmitter FEATURES ■ Rugged housing ■ Highly configurable: wide selection of pressure ranges, pressure connections and electrical terminations ■ Output: select voltage or current versions ■ Available with externally adjustable zero and span access TYPICAL USES ■ Test stands ■ Pump and pneumatic systems control PERFORMANCE SPECIFICATIONS Reference Accuracy Class ±0.25%, ±0.5%, ±1.0% of span (Includes Terminal Point Method includes: hysteresis, non-linearity): non-repeatability, zero offset and span setting Pressure Transmitter Best Fit Straight ±0.2%, ±0.4%, ±0.5% of span Line (BFSL): Add ±0.05% for ranges >5,000 psi Durability: >10 million cycles Stability: <±0.25% span/year at reference conditions ENVIRONMENTAL SPECIFICATIONS Temperature -4 °F to 185 °F (-20 °C to 85 °C) Effects: ±1.0% of span for ±0.25% accuracy class ±2.0% of span for ±0.5% and ±1.0% accuracy class Humidity Effects: 0-95% R.H. non-condensing (no effects) 0-100% R.H. with welded enclosure (no effects) KEY BENEFITS• Provides the user with accurate, reliable, and stable output data• Board microprocessor provides extremely linear and precise performance over the entire pressure and temperature range ELECTRICAL SPECIFICATIONS FUNCTIONAL SPECIFICATIONS Response Time: <2ms Pressure Ranges: Vacuum, gauge, compound and absolute pressure from 0 to 5 psi through 0 to 10,000 psi (Bar ranges available) Sweep Vibration: 50-2,000Hz, 5g peak Position Effect: ±0.02%, typical Circuit Protection: Reverse polarity and mis-wire protected Insulation (Circuit Case): Output Signal: Supply Voltage: (unregulated) Min. Max. Overpressure: Proof: Burst: All specifications are subject to change without notice. All sales subject to standard terms and conditions. 1 of 4 Ashcroft® and Trust the Shield® are trademarks of Ashcroft Inc. The following non-Ashcroft trademarks are the property of their respective owners: 17-4PH®, Aminco®, Bendix® , Hirschmann®, VCR®, Tri-Clamp®. For more information, see Ashcroft Brands & Trademarks ©2024 Ashcroft Inc. a2_transducer_ds_RevH_10-24-24

Data Sheet A2 Pressure Transmitter Electrical Terminations: See ordering code on page 3 for options LOAD LIMITATIONS 4-20 mA OUTPUT ONLY , Environmental Rating: WETTED MATERIAL Diaphragm Process Connection PHYSICAL SPECIFICATIONS Housing 304 Stainless steel VdcMin = 12V + (0.022A* X (RL)) RL = RS+ RW RL = Loop Resistance (ohms) RS = Sense Resistance (ohms) RW = Wiring Resistance (ohms) * (Includes a 10% safety factor) All specifications are subject to change without notice. All sales subject to standard terms and conditions. Ashcroft® and Trust the Shield® are trademarks of Ashcroft Inc. The...

CASHCROFT Trust the shield.® A2 Pressure Transmitter ORDERING CODE Example: Pressure Connection F01 - Vs NPT Female M01 - 7s NPT Male M02 - 1/4 NPT Male M04 - 1/2 NPT Male VM2 - VCR® process connection 1/4" VCR® gland w/ 9/is-18 Male nut VF2 - VCR® process connection 1/4” VCR® gland w/ 9/is-18 Female nut S15 - Sanitary seal 11/2" Tri-Clamp® S20 - Sanitary seal 2" Tri-Clamp® Output Signal 16 - 1-6 Vdc 42 - 4-20 mA Electrical Termination Integral Cable (Pigtail) F2 - 3' shielded cable (available with enclosure code or S, Z) Pi - Specify length (available with enclosure code or S, Z) Hirschmann®...

Data Sheet CASHCROFT Trust the shield.® DIMENSIONS in [ ] are millimeters For reference only, consult Ashcroft for specific dimensional drawings Heavy Industrial (Enclosure S, Z, Y, W) RANGE TABLE All specifications are subject to change without notice. All sales subject to standard terms and conditions. 4 of 4 Ashcroft® and Trust the Shield® are trademarks of Ashcroft Inc. The following non-Ashcroft trademarks are the property of their respective owners: 17-4PH®, Aminco®, Bendix® , Hirschmann®, VCR®, Tri-Clamp®. For more information, see Ashcroft Brands & Trademarks ©2024 Ashcroft Inc. a2_transducer_ds_RevH_10-24-24...