Corrosion Test Chamber
12Pages

testing corrosion resistance to the limit Salt Spray and Cyclic Corrosion Test Chambers

Ascott - leading by design Highlighting some of the new optional accessories introduced for use with the latest product range. ensure the fall-out is within the specified limits. This interrupts the testing and unsettles the climate inside the chamber. Ascott Electronic Catchpots address these issues by automating much of this process. ACC01 - Kit for Renault D17 2028 compliance The Renault D17 2028 cyclic corrosion test specification - known widely as ECC-1, requires special features for compliance. This kit ensures that an Ascott CC1000ip chamber is fully equipped with these features. The...

At the forefront of chamber design Ascott have been at the forefront of test chamber design for many years, and our latest product range embodies customer led innovation, blending performance with technical excellence. The creation and control of corrosive climates has never been more demanding. The development of new materials and surface coatings, plus increasing user expectations gives rise to ever more rigorous testing. This is our forte. Let our expertise be your reassurance that choosing an Ascott chamber will ensure your testing is precise, compliant and repeatable. Salt Spray...

Salt Spray Corrosion Test Chambers Ascott salt spray test chambers are offered in two Premium models can perform the same basic salt model ranges: Standard & Premium. spray tests, but in addition are equipped with Standard models meet the requirements of basic, continuous salt spray tests conducted at a single temperature only, such as ASTM B117 and similar international test standards, and may be used with pH neutral salt solutions (NSS) or those acidified by the addition of Acetic Acid (ASS) or extra features which enable them to undertake ‘modified’ tests such as those defined in ASTM...

Cyclic Corrosion Test (CCT) Chambers Ascott CCT chambers are designed to be flexible - which may be programmed to occur in any enough to comply with as many different CCT sequence and be repeated automatically. By specifications as possible. As standard they come choosing from a wide range of optional with the ability to create 4 distinct climates: accessories, these climates may be added to as 1. Salt spray 2. Condensation humidity (wetting) 3. Air drying 4. Controlled humidity required to further extend the number of climates and conditions that can be created. Graph showing standard...

Test Chambers All Ascott corrosion test chamber models feature: • Touch-screen operator control interface. • Canopy color choice • ‘Easy Open’ pneumatically operated canopy. • Dry seal gasket prevents wetting operator’s clothes, etc. • Low loading threshold for loading and unloading. • Floor standing models have a large capacity salt solution reservoir mounted on castors for mobility. • Calibration certificate • Interior viewing window • Consumables spares kit • Easily accessible salt spray atomizer(s) in transparent hard-wearing acrylic. • Purge of the cabinet interior with fresh air after...

Test Chambers Salt spray chamber performance Temperature range Salt spray fall-out rates Wetting mode (Premium chambers only) Drying mode (Premium chambers only) Adjustable from ambient to +50°C/+122°F Adjustable from 0.5 to 2.5 ml per 80 cm2 per hour Adjustable from ambient to +50°C/+122°F Adjustable from ambient to +50°C/+122°F Cyclic corrosion test chamber performance Wetting mode Temperature range Humidity range Temperature range Salt spray fall-out rates Temperature range Humidity range Temperature/humidity range Salt spray mode Drying mode Controlled humidity mode Adjustable from...

All Ascott chambers are supplied comprehensively equipped and ready to run, once connected to the necessary external service utilities. The following optional accessories may not therefore be necessary, but some may be considered desirable. Most of the accessories on this page may be used with any of our chamber types. The color key q q q shown alongside each item provides a clear guide to the compatibility between the accessory and the chamber types. Optional testing facilities F = factory fitted only A = available separately Optional accessories Standard salt spray chambers Premium salt...

F = factory fitted only A = available separately Optional accessories Standard salt spray chambers Premium salt spray chambers Cyclic corrosion test chambers Test Chambers Pre-equips a CCT chamber with everything needed to connect it to an ACC90 dehumidifier (available separately) The fitting of this interface enables the dehumidifier to be procured at the same time as the chamber, or later if required. † Specify as: ACC80/450/1000 for 450 &1000 Ltr chambers; ACC80/2000 for 2000 Ltr chambers To deliver dehumidified air to CCT chambers where humidity control at, or just below ambient...

Digital pH meter, for measuring the pH of salt solution fallout over range 0-14 pH with a resolution of 0.01 pH. Supplied complete with buffers. Precision hand-held thermo-hygrometer for independently checking the chamber temperature and humidity. Includes a special salt resistant measuring probe mounted on an extension cable. Range; -40 to +85°C & 0 to 100%RH. Requires any size entry port (see option ACC10) to access the chamber interior. Re-transmission of ACC36 temperature & humidity signals Re-transmission of chamber temp & humidity as 2 x 0-10VDC signals via externally mounted socket....

F = factory fitted only A = available separately Optional accessories Standard salt spray chambers Premium salt spray chambers Cyclic corrosion test chambers Test Chambers Entry ports Sealable chamber entry port through the chamber’s left hand wall to enable the connection of external monitoring/driving equipment. Note: not suitable for use with option ACC46. † Specify as: ACC10/35 35mm/1.37" diameter ACC10/110 110mm/4.33" diameter (not available for 120 Ltr chambers) Mesh type racking Mesh type racking for testing small components. Locates on the high level shelf supports provided as...