*mydirectindustry

Catalogs
ASCO
WATER REGULATORS

WATER REGULATORS

1 / 2 PagesView full catalog

WATER REGULATORS

Product catalog summary

Features

Wide tap water pressure regulation ranges from 0.5 to 6 bar.
Reliability and durability with low hysteresis and rolling diaphragm, ensuring no friction.
Non-self-relieving regulator.

General Specifications

Fluid: Water
Maximum inlet pressure: 12 bar
Controlled pressure: 0.2-3 bar or 0.5-6 bar
Hysteresis: 0.35 bar
Ambient temperature range: +5°C to +50°C
Maximum flow (Qv at 6.3 bar): 550 l/min - 650 l/min

Construction

Seals: NBR (nitrile)
Body: Polyamide (PA) with glass-fibre reinforcement
Locking pressure control knob: "pull-turn-push" mechanism

Installation

Regulators can be installed in any position.
Panel mounting is possible with a mounting ring (see accessories).
Fluid flow direction is indicated by an arrow and "IN" - "OUT" marking on the body.

Specifications

Water Regulators: Modulair 105 range
Connection sizes: G 1/8 - G1/4
Series: 342
Type: Modulair

Options

Equipment for use in potentially explosive atmospheres caused by dusts or gases (ATEX Directive).
Zones classification gas group ATEX option codes:
- 2-22 II3GD c T 85°C (T6) IIA-IIB-IIC 612077
- 1-21 II2GD c IIC T85°C (T6) IIC 612066

Accessories

Refer to "Pneumatic components for industrial automation" catalogue.

Dimensions and Weight

Weight: 0.130 kg
Mounting options include bracket(s) and panel mounting with a hole diameter of 30.5 mm.

Catalog excerpts

WATER REGULATORS Modulair 105 range G 1/8 - G1/4 FEATURES • Wide tap water pressure regulation ranges: 0,5 to 6 bar • Reliability and durability, low hysteresis, rolling diaphragm, no friction • Non-self-relieving regulator GENERAL Fluid Maximum inlet pressure Controlled pressure Hysteresis Ambient temperature range Max. flow (Qv at 6,3 bar) CONSTRUCTION Seals Body Locking pressure control knob NBR (nitrile) polyamide (PA) (glass-fibre reinforced) "pull-turn-push" 00148GB-2016/R01 Availability, design and specifications are subject to change without notice. All rights reserved. INSTALLATION Regulators can be installed in any position Panel mounting possible (mounting ring: see accessories) Fluid flow direction indicated by arrow and "IN" - "OUT" marking on body SPECIFICATIONS pipe size ACCESSORIES See "Pneumatic components for industrial automation" catalogue OPTION • Equipment for use in potentially explosive atmospheres caused by dusts or gases (ATEX Directive) All leaflets are available on: www.asco.com

Open the catalog to page 1

WATER REGULATOR MODULAIR 105 RANGE DIMENSIONS (mm), WEIGHT (kg) Weight: 0,130 kg Panel mounting (hole dia.: 30.5 mm) Mounting with bracket(s) 97 40 60,5 95 1 Mounting with top bracket (accessory) and ring 2 Mounting with 2 side brackets (accessory) 00148GB-2008/R01 Availability, design and specifications are subject to change without notice. All rights reserved. All leaflets are available on: www.asco.com V1162-2

Open the catalog to page 2

All ASCO catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list