Catalogs >
ASCO >
Solenoid Valve - 3/2 - ASCO Series 188

Solenoid Valve - 3/2 - ASCO Series 188
2Pages

Catalog excerpts

Solenoid Valve - 3/2 - ASCO Series 188 - 1

JOINABLE REGULATORS FEATURES • Joinable modular pressure regulator for supplying different circuits at different pressures from a common supply • Compact and economical directly joinable units • No pipework or couplings between regulators • High ﬂow, low hysteresis • Joinable to main supply line, any FRL or Modulair 112 type accessories, quick and easy extension • This material exists in version intended for use in potentially explosive atmospheres caused by gases or dusts - ATEX directive94/9/CE (see ATEX option) POSSIBLE CONFIGURATIONS • Supply connection at left-hand and/or right-hand side • Possibility of having supplies with two different pressures, by placing a blanking plate at the appropriate point • Other conﬁgurations are possible, consult us GENERAL SPECIFICATION FLUID : PORTS : MAX. INLET PRESSURE : ADJUSTMENT RANGE : AMBIENT TEMPERATURE : MAX. FLOW (Qv at 6.3 bar) : HYSTERESIS : SELF-RELIEVING REGULATOR Filtered or neutral gas or compressed air G1/2 (inlet ports G1/2) 16 bar 0.5 - 10 bar, 0.2 - 3 bar -10°C to +60°C 5400 l/min (ANR) 0.2 bar CONSTRUCTION Regulating device with a rolling diaphragm (very low hysteresis) Core and seals of nitrile (NBR) Body of painted zamak Locking “Pull-Turn-Push” pressure control knob One G1/8 port is provided for a pressure gauge on the side opposite the load port 00265GB-2006/R01 Availability, design and speciﬁcations are subject to change without notice. All rights reserved. INSTALLATION Combined with separately ordered assembly kits. Regulators can be installed in any position, mounting options: - Direct mounting on support with two 5 mm dia. screws (screws not included) - Mounting with two side brackets (see accessories) - Panel mounting (37.5 mm dia.) with mounting rings (see accessories) CHOICE OF EQUIPMENT pipe size outlet common inlet controlled pressure max. ﬂow at 6.3 bar pressure setpoint and ΔP of 1 bar/setpoint l/min (ANR) without pressure gauge with pressure gauge (1) Assembly kits are not supplied with regulators but must be ordered separately, code 34303001 (quantity: number of regulators minus 1) ACCESSORIES AND OPTIONS (see overleaf)

Open the catalog to page 1

Solenoid Valve - 3/2 - ASCO Series 188 - 2

inimams JOINABLE REGULATOR MODULAIR 112 OPTIONS • Key locking device mounted on adjustment knob - supplied installed on regulator, code: 662554. Others options or accessories, see pagee 46 • Adjustment range 0.5 to 12 bar (provide for 50 mm dia. 0-16 bar pressure gauge) • Equipment for use in potentially explosive atmospheres caused by dusts or gases (ATEX Directive 94/9/EC) DIMENSIONS AND WEIGHTS Direct frontal mounting (7) range Modulair 112 B 125 Mounting with side brackets C2 JOINABLE REGULATOR AIRFLOW CHARACTERISTIC CURVE TYPE: MODULAIR 112 Panel mounting hole dia. for Modulair...

Open the catalog to page 2

Solenoid Valve - 3/2 - ASCO Series 188 2Pages

Catalog excerpts

All ASCO catalogs and technical brochures

Solenoid Valve - 3/2 - ASCO Series 188
2Pages