FILTER, REGULATOR + LUBRICATOR SYSTEMS Modulair 160 G 3/4 to G 1 1/2 342 Type Modulair 00281GB-2016/R02 Availability, design and specifications are subject to change without notice. All rights reserved. Compressed air or neutral gas The compressed air used must be dry to prevent ice buildup G3/4 to G1 1/2 17,5 bar 12 bar 0,5-12 bar, 0,5-16 bar, (0,5 - 4 bar) -10°C to +50°C (+60°C at 12,5 bar) G3/4 = 8600 l/mn - G1 = 14650 l/mn Self-relieving Selective oil fog 520 cm3 OVERALL SPECIFICATION FLUID PORTS MAX. INLET PRESSURE at 23°C at 50°C CONTROLLED PRESSURE AMBIENT TEMPERATURE (°C) MAX. FLOW (P1=10 bar and P2=6,3bar - AP=1 bar) REGULATOR LUBRICATION BOWL CAPACITY CONSTRUCTION Filtering capacity 30 mm or 5 mm Semi-automatic or automatic drain, pipable (manual on request) Regulating device with flat diaphragm Lubricator oil refilling unpressurised/pressurised Metal bowl with polypropylene oil level viewing window INDIVIDUAL SPECIFICATIONS AND CONSTRUCTION Filter/regulator - lubricator: see following pages CHOICE OF EQUIPMENT Modulair range consists of two components (combined filter/regulator + lubricator, delivered assembled) (1) Minimum for lubricator startup (4) The G 1 1/4 and G 1 1/2 versions are composed of a G 1 version + 1 set of 2 G 1 1/4 or G 1 1/2 (2) 0-16 bar pressure gauge flanges (1 connecting flange for each end of each component). When assembling several components (3) 0-12 bar pressure gauge together (FRL, isolation valve etc...), select G 1 components and provide for 1 set of G 1 1/4 or G 1 1/2 flanges (see “Accessories” pages) (5) Metal manual drain ISOLATION VALVE, SHUT-OFF VALVE AND SOFT-START UNIT OPTIONS FOR FILTER/REGULATOR • Regulator designed to receive a key lock, code 662597 • Key locking device attached to adjustment knob, supplied installed on regulator, code: 662593 • Adjustment range: 0,5 to 4 bar, (provide 50 mm dia. 0 - 4 bar pressure gauge) code: 662567 OTHER PRODUCT OPTIONS • Electronic pressure switch • By-pass module • Key locking device (A), supplied separately for regulator designed to receive this accessory, code: 34303050 ACCESSORIES (see following pages) All leaflets are available on: www.asco.com Air Preparation - 71

MODULAIR 160 RANGE SYSTEM PRESSURE LOSS VERSUS AIR FLOW CURVES G 3/4 Outlet pressure Outlet pressure Air flow (inlet pressure 8 bar) Air flow (inlet pressure 8 bar) DIMENSIONS AND WEIGHTS - G3/4 - G1 VERSIONS Weight: 2,8 kg Mounting with side brackets Mounting with top bracket ➀ Mounting by 2 side brackets (accessory) ➁ Mounting by top bracket (accessory) ➂ Sight dome ➃ 50 mm dia. pressure gauge ➄ Clearance required for bowl removal ➅ Condensate level window ➆ Oil min./max. level window ➇ semi-automatic drain connectable G1/8 drain ➈ Automaticflexibleconnectable to 6 mm ID tubing INSTALLATION...